开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. Ft817
  2. Messages
Single Messages Topics Expanded Polls

Re: LDG Z817

 

I've gotten into the habit of long pressing the Z817 at every band change. Not sure how or if it matches automatically. Am I missing a key point in operation?

Mike WA1MAD

On Oct 9, 2024 5:40 PM, Al WB9UVJ <markaren1@...> wrote:
Allan,
I have the Z11 which is the predecessor to the Z817.? I had to add an accessory from W4RT called the One Touch Tune to allow me to key and tune from the radio.?
?
The tuner has a couple of thousand memories and once a tuning setup has been stored, the tuner will go back to that one once it senses the frequency.? When setting the baud rate, you change the CAT function (#14) baud rate, not one of the other settings.? You have to press and hold the F key to store the new setting.? If you have the right cable, it will only fit in the ACC port on the back of the radio.? Be sure that the tuner is not in the "Bypass" mode and then operate as outlined in the manual.? The tuner will key the transmitter for a full tune up cycle as shown in the manual.? You can find the manual on the DX Engineering site.
--
Al Skierkiewicz
WB9UVJ
Join [email protected] to automatically receive all group messages.