Re: Aliexpress TCXO board...
|
Even at that, the thing to be more concerned with is the reference for the microwave LO. At 10 GHz, a 0.1 Hz error in the 10 MHz reference multiplied up becomes roughly a 100 Hz error. As you go up in bands beyond that, it gets worse. Your error in the IF rig will likely be a lot less than that, even without a TCXO in the IF rig. That error is not multiplied up to 10 GHz.
73, Zack W9SZ
On Fri, May 24, 2024 at 5:13?AM Richard Fenech via <richard9h1rf= [email protected]> wrote: Hi Tobias. If you intend to use your radio as a microwave transverter driver then I would recommend a tcxo. But for HF qso's you don't really need it.
Richard 9H1RF
On Fri, 24 May 2024, 09:43 Tobias KK7BCO/2M0TFF via , <feltusfecit1= [email protected]> wrote: Hello,
I was not looking for this specifically, but just found that Aliexpress has TCXO boards for the FT-817. I have no idea if they are any good. I also have never had an issue with the stock oscillator.
73
|
