¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: Output power


 

¿ªÔÆÌåÓý

You need to use FM on HF/6 as well to get a carrier to measure.

?

73¡­.Eric VK2VE.

?

From: [email protected] <[email protected]> On Behalf Of Douglas Richards
Sent: Friday, 14 October 2022 09:26
To: ft817 <[email protected]>
Subject: Re: [ft817] Output power

?

On hf I was using lsb, vhf/uhf, I was using fm.

Douglas?

?

?

On Oct. 13, 2022 at 6:23 p.m., Ron Wright via groups.io <lt_wright_flg@...> wrote:

Make sure you are using the correct antenna connector, front or rear.? Will have "R" on display if rear.

?

The connector can be selected in menu for different bands.

?

There is only one PA for all the bands so if working on one band should be on all.

?

Be careful with the PA.? The rig has little to no protection so if using the wrong connector or bad load it can damage the PA if in TX for long period.

?

One other note, what mode you using for your test???

?

73, ron, n9ee/r

Ron Wright, N9EE/R

Hernando Co ARES EC

Spring Hill, Florida also n9ee55@...

?

?

On Thursday, October 13, 2022 at 05:57:07 PM EDT, davebb123456 <davidbrowne76@...> wrote:

?

?

Very cheap fix if DIY,

Dave

?

On Thu, 13 Oct 2022, 22:03 Douglas Richards, <ve3ffr@...> wrote:

Afternoon?

?

Name here is Douglas Richards VE3FFR?

?

I just recently purchased my Ft-817, and after charging the battery I was able to test the output? power.?

?

Vhf approximately 5-6 watts

Uhf approximately 3-4 watts

Hf and 6m, non existence.

?

According to my serial number? research,?

my rig was made in 2000, September, lot 81 and the 0028 unit made.?

Any suggestions? greatly appreciated.?

?

Thank you

?

73

?

Douglas Richards VE3FFR?

?

?

?


Virus-free.

Join [email protected] to automatically receive all group messages.