Re: Output power

Ron Wright All Messages By This Member #113190 Make sure you are using the correct antenna connector, front or rear.? Will have "R" on display if rear. The connector can be selected in menu for different bands. There is only one PA for all the bands so if working on one band should be on all. Be careful with the PA.? The rig has little to no protection so if using the wrong connector or bad load it can damage the PA if in TX for long period. One other note, what mode you using for your test??? 73, ron, n9ee/r Ron Wright, N9EE/R Hernando Co ARES EC Spring Hill, Florida also n9ee55@... On Thursday, October 13, 2022 at 05:57:07 PM EDT, davebb123456 <davidbrowne76@...> wrote: Very cheap fix if DIY, Dave toggle quoted message Show quoted text On Thu, 13 Oct 2022, 22:03 Douglas Richards, <ve3ffr@...> wrote: Afternoon? Name here is Douglas Richards VE3FFR? I just recently purchased my Ft-817, and after charging the battery I was able to test the output? power.? Vhf approximately 5-6 watts Uhf approximately 3-4 watts Hf and 6m, non existence. According to my serial number? research,? my rig was made in 2000, September, lot 81 and the 0028 unit made.? Any suggestions? greatly appreciated.? Thank you 73 Douglas Richards VE3FFR? ve3ffr@...?

Join [email protected] to automatically receive all group messages.

开云体育