The documentation for wiring the ACC plug from the MX-P50M power amplifier is sparse. I realize it should be simple with the black control wire going to the GND and the red control wire to the TX GND pins of the ACC.?
I'm looking for confirmation that I am using the correct pins on the 8-pin Mini DIN plug. Please excuse my crude ASCII diagram and numbering of the pins; the view is looking into the bottom of plug, i.e., at the exposed pins.?
I have black (GND) going to pin 4 and red (TX GND) going to pin 8. Is this correct?
8-pin Mini DIN Plug (Male) for ACC
? ? ? ? ? ? ? ? ? ? ? top
? ? ? ? ? ?/------------------\
? ? ? ? ?/? ? ? 1? ? ?2? ? ?3? ? ? ?\
? ? ? ? /? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?\
left? ?|? ? ? 4? ? ?5? ? ? ? 6? ? ? ? |? ?right
? ? ? ? \? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?/
? ? ? ? ?\? ? ? ? ? 7? ? ?8? ? ? ? ? /
? ? ? ? ? ?\-----------------/
? ? ? ? ? ? ? ? ? bottom
73,?
Mark WB8BCU
