OK, issue found. There is a power slider in
WSJT-X that I readjusted and voila I have power output. It was
at about 1/2 way in its setting and I turned it up all of the
way and had max power output from the rig now.
Thanks-Bob-W0YBS
On 11/13/2019 12:04 PM, Robert Sauvan
wrote:
Hi all,
My first post in hopes Im posting to the right format. If not
please guide me in the right direction. My problem is this: Im
using the SCU-17 digital interface with my newly acquired 817ND. I
am trying to get it to work on FT-8. Im using WSJT-X for the
software. I am able to get it to receive no problem. I also have
the cat control working as well. PTT seems to be working but my
radio is not showing power output when it is keyed up by WSJT-X.
It seems to go into transmit but the meter shows no power output.
Im sure it is just a setting in WSJT-10 or possibly I need to set
something in the 817 menu that I am missing? If anyone else is
using the 817 with the SCU-17 and WSJT-X, I would like to see what
your settings are if possible.
Thanks-Bob-W0YBS
--
Thanks
Bob Sauvan-W0YBS/V31CO
rsauvan@...
