|
I got a bunch of cast offs from a good friend. He wanted me to find a new home for them. The spindle pictured is an unknown but looks like its possibly from a Laguna or Knapp. Its available for the cost of shipping. I'm in Ontario, Canada.
John
JMK Services
|
John, I don't believe it is a Knapp unless the earlier machines had a different system.? Mine has a through bolt.? Dave
toggle quoted message
Show quoted text
I got a bunch of cast offs from a good friend. He wanted me to find a new home for them. The spindle pictured is an unknown but looks like its possibly from a Laguna or Knapp. Its available for the cost of shipping. I'm in Ontario, Canada.
John
JMK Services
|
Thanx Dave I was hoping you would comment. I saw a YouTube of Laguna shaper and they look similar but my friend said he had Knapp before Felder. I will hold on and see if this thread goes anywhere before scraping it.?
toggle quoted message
Show quoted text
-------- Original message -------- From: David Kumm <davekumm@...> Date: 2020-08-12 10:46 a.m. (GMT-05:00) Subject: Re: [FOG] Unknown Shaper Spindle 30mm
John, I don't believe it is a Knapp unless the earlier machines had a different system.? Mine has a through bolt.? Dave
I got a bunch of cast offs from a good friend. He wanted me to find a new home for them. The spindle pictured is an unknown but looks like its possibly from a Laguna or Knapp. Its available for the cost of shipping. I'm in Ontario, Canada.
John
JMK Services
|
spindle looks a little like my SCMI but the taper looks smaller.? I don't know if the T110 spindle could be a possibility.? I'm not familiar with the Laguna shapers but I think they change suppliers regularly so it could belong to one of theirs. ? It is a better
design than Knapp's so it is off a good machine.? Dave
toggle quoted message
Show quoted text
Thanx Dave I was hoping you would comment. I saw a YouTube of Laguna shaper and they look similar but my friend said he had Knapp before Felder. I will hold on and see if this thread goes anywhere before scraping it.?
-------- Original message --------
From: David Kumm <davekumm@...>
Date: 2020-08-12 10:46 a.m. (GMT-05:00)
Subject: Re: [FOG] Unknown Shaper Spindle 30mm
John, I don't believe it is a Knapp unless the earlier machines had a different system.? Mine has a through bolt.? Dave
I got a bunch of cast offs from a good friend. He wanted me to find a new home for them. The spindle pictured is an unknown but looks like its possibly from a Laguna or Knapp. Its available for the cost of shipping. I'm in Ontario, Canada.
John
JMK Services
|
The T110 taper is smaller than the MK 5 of the T130.? ?I? thought from the photo that it's a straight shaft. If it is tapered. I have a friend with a T110.? I'll pay the shipping?cost.?
Marlowe McGraw?
On Wed, Aug 12, 2020, 11:30 AM David Kumm < davekumm@...> wrote:
spindle looks a little like my SCMI but the taper looks smaller.? I don't know if the T110 spindle could be a possibility.? I'm not familiar with the Laguna shapers but I think they change suppliers regularly so it could belong to one of theirs. ? It is a better
design than Knapp's so it is off a good machine.? Dave
Thanx Dave I was hoping you would comment. I saw a YouTube of Laguna shaper and they look similar but my friend said he had Knapp before Felder. I will hold on and see if this thread goes anywhere before scraping it.?
-------- Original message --------
Date: 2020-08-12 10:46 a.m. (GMT-05:00)
Subject: Re: [FOG] Unknown Shaper Spindle 30mm
John, I don't believe it is a Knapp unless the earlier machines had a different system.? Mine has a through bolt.? Dave
I got a bunch of cast offs from a good friend. He wanted me to find a new home for them. The spindle pictured is an unknown but looks like its possibly from a Laguna or Knapp. Its available for the cost of shipping. I'm in Ontario, Canada.
John
JMK Services
|
Marlowe here's some pics that may help. Definitely tapered. Let me know if you need more info.?
toggle quoted message
Show quoted text
-------- Original message -------- From: Marlowe McGraw <marlomcgraw@...> Date: 2020-08-12 12:39 p.m. (GMT-05:00) Subject: Re: [FOG] Unknown Shaper Spindle 30mm
The T110 taper is smaller than the MK 5 of the T130.? ?I? thought from the photo that it's a straight shaft. If it is tapered. I have a friend with a T110.? I'll pay the shipping?cost.?
Marlowe McGraw? On Wed, Aug 12, 2020, 11:30 AM David Kumm < davekumm@...> wrote:
spindle looks a little like my SCMI but the taper looks smaller.? I don't know if the T110 spindle could be a possibility.? I'm not familiar with the Laguna shapers but I think they change suppliers regularly so it could belong to one of theirs. ? It is a better
design than Knapp's so it is off a good machine.? Dave
Thanx Dave I was hoping you would comment. I saw a YouTube of Laguna shaper and they look similar but my friend said he had Knapp before Felder. I will hold on and see if this thread goes anywhere before scraping it.?
-------- Original message --------
Date: 2020-08-12 10:46 a.m. (GMT-05:00)
Subject: Re: [FOG] Unknown Shaper Spindle 30mm
John, I don't believe it is a Knapp unless the earlier machines had a different system.? Mine has a through bolt.? Dave
I got a bunch of cast offs from a good friend. He wanted me to find a new home for them. The spindle pictured is an unknown but looks like its possibly from a Laguna or Knapp. Its available for the cost of shipping. I'm in Ontario, Canada.
John
JMK Services
|
I don't think that is a 110.? Interested in what Marlowe thinks.? Dave
toggle quoted message
Show quoted text
Marlowe here's some pics that may help. Definitely tapered. Let me know if you need more info.?
-------- Original message --------
From: Marlowe McGraw <marlomcgraw@...>
Date: 2020-08-12 12:39 p.m. (GMT-05:00)
Subject: Re: [FOG] Unknown Shaper Spindle 30mm
The T110 taper is smaller than the MK 5 of the T130.? ?I? thought from the photo that it's a straight shaft.
If it is tapered. I have a friend with a T110.? I'll pay the shipping?cost.?
Marlowe McGraw?
On Wed, Aug 12, 2020, 11:30 AM David Kumm < davekumm@...> wrote:
spindle looks a little like my SCMI but the taper looks smaller.? I don't know if the T110 spindle could be a possibility.? I'm not familiar with the Laguna shapers but I think they change suppliers regularly so it could belong to one of theirs. ? It is a better
design than Knapp's so it is off a good machine.? Dave
Thanx Dave I was hoping you would comment. I saw a YouTube of Laguna shaper and they look similar but my friend said he had Knapp before Felder. I will hold on and see if this thread goes anywhere before scraping it.?
-------- Original message --------
Date: 2020-08-12 10:46 a.m. (GMT-05:00)
Subject: Re: [FOG] Unknown Shaper Spindle 30mm
John, I don't believe it is a Knapp unless the earlier machines had a different system.? Mine has a through bolt.? Dave
I got a bunch of cast offs from a good friend. He wanted me to find a new home for them. The spindle pictured is an unknown but looks like its possibly from a Laguna or Knapp. Its available for the cost of shipping. I'm in Ontario, Canada.
John
JMK Services
|
Marlowe if you are still interested in the spindle please send me your address and I will see what it will?take to get to you by USPS.
The T110 taper is smaller than the MK 5 of the T130.? ?I? thought from the photo that it's a straight shaft. If it is tapered. I have a friend with a T110.? I'll pay the shipping?cost.?
Marlowe McGraw?
On Wed, Aug 12, 2020, 11:30 AM David Kumm < davekumm@...> wrote:
spindle looks a little like my SCMI but the taper looks smaller.? I don't know if the T110 spindle could be a possibility.? I'm not familiar with the Laguna shapers but I think they change suppliers regularly so it could belong to one of theirs. ? It is a better
design than Knapp's so it is off a good machine.? Dave
Thanx Dave I was hoping you would comment. I saw a YouTube of Laguna shaper and they look similar but my friend said he had Knapp before Felder. I will hold on and see if this thread goes anywhere before scraping it.?
-------- Original message --------
Date: 2020-08-12 10:46 a.m. (GMT-05:00)
Subject: Re: [FOG] Unknown Shaper Spindle 30mm
John, I don't believe it is a Knapp unless the earlier machines had a different system.? Mine has a through bolt.? Dave
I got a bunch of cast offs from a good friend. He wanted me to find a new home for them. The spindle pictured is an unknown but looks like its possibly from a Laguna or Knapp. Its available for the cost of shipping. I'm in Ontario, Canada.
John
JMK Services
|
Hi John, Sorry?for the late reply,? I been busy helping others move...
219?Kissena Park Ct, Covington, LA 70435
Marlowe?
Marlowe if you are still interested in the spindle please send me your address and I will see what it will?take to get to you by USPS.
The T110 taper is smaller than the MK 5 of the T130.? ?I? thought from the photo that it's a straight shaft. If it is tapered. I have a friend with a T110.? I'll pay the shipping?cost.?
Marlowe McGraw?
On Wed, Aug 12, 2020, 11:30 AM David Kumm < davekumm@...> wrote:
spindle looks a little like my SCMI but the taper looks smaller.? I don't know if the T110 spindle could be a possibility.? I'm not familiar with the Laguna shapers but I think they change suppliers regularly so it could belong to one of theirs. ? It is a better
design than Knapp's so it is off a good machine.? Dave
Thanx Dave I was hoping you would comment. I saw a YouTube of Laguna shaper and they look similar but my friend said he had Knapp before Felder. I will hold on and see if this thread goes anywhere before scraping it.?
-------- Original message --------
Date: 2020-08-12 10:46 a.m. (GMT-05:00)
Subject: Re: [FOG] Unknown Shaper Spindle 30mm
John, I don't believe it is a Knapp unless the earlier machines had a different system.? Mine has a through bolt.? Dave
I got a bunch of cast offs from a good friend. He wanted me to find a new home for them. The spindle pictured is an unknown but looks like its possibly from a Laguna or Knapp. Its available for the cost of shipping. I'm in Ontario, Canada.
John
JMK Services
--
|
toggle quoted message
Show quoted text
On Sat, Aug 15, 2020, 4:35 PM Marlowe McGraw via <marlomcgraw= [email protected]> wrote: Hi John, Sorry?for the late reply,? I been busy helping others move...
219?Kissena Park Ct, Covington, LA 70435
Marlowe?
Marlowe if you are still interested in the spindle please send me your address and I will see what it will?take to get to you by USPS.
The T110 taper is smaller than the MK 5 of the T130.? ?I? thought from the photo that it's a straight shaft. If it is tapered. I have a friend with a T110.? I'll pay the shipping?cost.?
Marlowe McGraw?
On Wed, Aug 12, 2020, 11:30 AM David Kumm < davekumm@...> wrote:
spindle looks a little like my SCMI but the taper looks smaller.? I don't know if the T110 spindle could be a possibility.? I'm not familiar with the Laguna shapers but I think they change suppliers regularly so it could belong to one of theirs. ? It is a better
design than Knapp's so it is off a good machine.? Dave
Thanx Dave I was hoping you would comment. I saw a YouTube of Laguna shaper and they look similar but my friend said he had Knapp before Felder. I will hold on and see if this thread goes anywhere before scraping it.?
-------- Original message --------
Date: 2020-08-12 10:46 a.m. (GMT-05:00)
Subject: Re: [FOG] Unknown Shaper Spindle 30mm
John, I don't believe it is a Knapp unless the earlier machines had a different system.? Mine has a through bolt.? Dave
I got a bunch of cast offs from a good friend. He wanted me to find a new home for them. The spindle pictured is an unknown but looks like its possibly from a Laguna or Knapp. Its available for the cost of shipping. I'm in Ontario, Canada.
John
JMK Services
--
|
