开云体育

File /3D Printer Files/Felder splinter block.stl uploaded

#file-notice

Group Notification #140652 The following items have been added to the Files area of the [email protected] group. /3D Printer Files/Felder splinter block.stl By: Brian Lamb <blamb11@...> Description: Splinter block for Pre-X-Roll 700 series machines
Jason Holtz All Messages By This Member #140658 Thanks Brian! I will give it a whirl and report back on it. Jason Jason Holtz J. Holtz Furniture 3307 Snelling Ave. South Minneapolis, MN 55406 612 432-2765 -- Jason J. Holtz Furniture 3307 Snelling Ave. South Minneapolis, MN 55406
Brian Lamb All Messages By This Member #140661 Measure your stop blocks, mine are 37mm wide off the fence and my printed part came out about 36.75mm, so I'll add the .25mm to the model and repost the stl file. Better to be slightly wider and sand it down rather than too narrow. Brian Lamb blamb11@... lambtoolworks.com On Sunday, March 30, 2025 at 07:19:25 AM MST, Jason Holtz via groups.io <jholtzy@...> wrote: Thanks Brian! I will give it a whirl and report back on it. Jason Jason Holtz J. Holtz Furniture 3307 Snelling Ave. South Minneapolis, MN 55406 612 432-2765 -- Jason J. Holtz Furniture 3307 Snelling Ave. South Minneapolis, MN 55406
Brian Lamb All Messages By This Member #140663 OK, I uploaded another version that's .25mm thicker, it's called the Felder spinter block 37mm wide. Brian Lamb blamb11@... lambtoolworks.com On Sunday, March 30, 2025 at 07:25:09 AM MST, Brian Lamb via groups.io <blamb11@...> wrote: Measure your stop blocks, mine are 37mm wide off the fence and my printed part came out about 36.75mm, so I'll add the .25mm to the model and repost the stl file. Better to be slightly wider and sand it down rather than too narrow. Brian Lamb blamb11@... lambtoolworks.com On Sunday, March 30, 2025 at 07:19:25 AM MST, Jason Holtz via groups.io <jholtzy@...> wrote: Thanks Brian! I will give it a whirl and report back on it. Jason Jason Holtz J. Holtz Furniture 3307 Snelling Ave. South Minneapolis, MN 55406 612 432-2765 -- Jason J. Holtz Furniture 3307 Snelling Ave. South Minneapolis, MN 55406
Jason Holtz All Messages By This Member #140745 Brian,? My friend printed the thicker version as it matches my stop thickness. It turned out great, was about 4 hours of print time. -- Jason J. Holtz Furniture 3307 Snelling Ave. South Minneapolis, MN 55406
Brian Lamb All Messages By This Member #140746 Perfect, glad it worked out! Brian Lamb blamb11@... lambtoolworks.com On Friday, April 4, 2025 at 06:44:49 AM MST, Jason Holtz via groups.io <jholtzy@...> wrote: Brian,? My friend printed the thicker version as it matches my stop thickness. It turned out great, was about 4 hours of print time. -- Jason J. Holtz Furniture 3307 Snelling Ave. South Minneapolis, MN 55406

Previous Topic Next Topic