|
What is the best way to achieve a bead like below around the outside perimeter of the door?
|
Imran,?
1.That photo suggests CNC made the exterior bead.
2.For a more traditional technique, run some molded/bead edgebanding, and affix around outside perimeter?as trim detail.
3. Or route/plane the beads in the straights as close to corners as can be found, and finish corners by hand.
What is the best way to achieve a bead like below around the outside perimeter of the door?
-- Brett Wissel Saint Louis Restoration 1831 S Kingshighway Blvd (at Shaw Blvd) St Louis, MO 63110 314.772.2167 brett@...
|
Cnc mdf, mitered solid or an applied bead.? Those look cnc or mitered
Imran,?
1.That photo suggests CNC made the exterior bead.
2.For a more traditional technique, run some molded/bead edgebanding, and affix around outside perimeter?as trim detail.
3. Or route/plane the beads in the straights as close to corners as can be found, and finish corners by hand.
What is the best way to achieve a bead like below around the outside perimeter of the door?
--
Brett Wissel Saint Louis Restoration (at 314.772.2167 brett@...
|
Thank you Brett and Jared. Those are essentially the options I received on my FB group. We got people with good experience ?
toggle quoted message
Show quoted text
On Apr 5, 2025, at 2:30?PM, Jared Sankovich via groups.io <Sankovichj@...> wrote: ? Cnc mdf, mitered solid or an applied bead.? Those look cnc or mitered
Imran,?
1.That photo suggests CNC made the exterior bead.
2.For a more traditional technique, run some molded/bead edgebanding, and affix around outside perimeter?as trim detail.
3. Or route/plane the beads in the straights as close to corners as can be found, and finish corners by hand.
What is the best way to achieve a bead like below around the outside perimeter of the door?
--
Brett Wissel Saint Louis Restoration (at 314.772.2167 brett@...
|
Imran. I have done solid plant on staff bead its a lot of work, and you have very little room for discrepancy, but it does look extremely nice. Most would add the staff bead to the frame, this way its easy to do any adjustment to the door. Kindest Regards
Jonathan Samways
Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si no es vd.el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. This message is intended exclusively for its addressee and may contain information that is confidential and protected by professional privilege.If you are not the intended recipient you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it.
Thank you Brett and Jared. Those are essentially the options I received on my FB group. We got people with good experience ? On Apr 5, 2025, at 2:30?PM, Jared Sankovich via <Sankovichj= [email protected]> wrote: ? Cnc mdf, mitered solid or an applied bead.? Those look cnc or mitered
Imran,?
1.That photo suggests CNC made the exterior bead.
2.For a more traditional technique, run some molded/bead edgebanding, and affix around outside perimeter?as trim detail.
3. Or route/plane the beads in the straights as close to corners as can be found, and finish corners by hand.
What is the best way to achieve a bead like below around the outside perimeter of the door?
--
Brett Wissel Saint Louis Restoration (at 314.772.2167 brett@...
|
Thanks Jonathan. This guy subs doors and drawer fronts to me. I told him he can’t afford me to apply the bead ?
So he is going to do that and I shared with him the methods he can try.
BTW, I am not familiar with industry terms. You and another guy (on my FB group) used the term “Plant”. I assume it means applied. Is there any more to it?
toggle quoted message
Show quoted text
On Apr 5, 2025, at 4:28?PM, jontathan samways via groups.io <jonathansamways@...> wrote: ? Imran. I have done solid plant on staff bead its a lot of work, and you have very little room for discrepancy, but it does look extremely nice. Most would add the staff bead to the frame, this way its easy to do any adjustment to the door. Kindest Regards
Jonathan Samways
Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si no es vd.el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. This message is intended exclusively for its addressee and may contain information that is confidential and protected by professional privilege.If you are not the intended recipient you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it.
Thank you Brett and Jared. Those are essentially the options I received on my FB group. We got people with good experience ? On Apr 5, 2025, at 2:30?PM, Jared Sankovich via <Sankovichj= [email protected]> wrote: ? Cnc mdf, mitered solid or an applied bead.? Those look cnc or mitered
Imran,?
1.That photo suggests CNC made the exterior bead.
2.For a more traditional technique, run some molded/bead edgebanding, and affix around outside perimeter?as trim detail.
3. Or route/plane the beads in the straights as close to corners as can be found, and finish corners by hand.
What is the best way to achieve a bead like below around the outside perimeter of the door?
--
Brett Wissel Saint Louis Restoration (at 314.772.2167 brett@...
|
Imran, the expression to plant on must be an British industry thing. I picked it up from the guy that taught me, he trained as a coffin maker, and he was taught by a wheelwright.
Kindest Regards
Jonathan Samways
Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si no es vd.el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. This message is intended exclusively for its addressee and may contain information that is confidential and protected by professional privilege.If you are not the intended recipient you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it.
Thanks Jonathan. This guy subs doors and drawer fronts to me. I told him he can’t afford me to apply the bead ?
So he is going to do that and I shared with him the methods he can try.
BTW, I am not familiar with industry terms. You and another guy (on my FB group) used the term “Plant”. I assume it means applied. Is there any more to it? On Apr 5, 2025, at 4:28?PM, jontathan samways via <jonathansamways= [email protected]> wrote: ? Imran. I have done solid plant on staff bead its a lot of work, and you have very little room for discrepancy, but it does look extremely nice. Most would add the staff bead to the frame, this way its easy to do any adjustment to the door. Kindest Regards
Jonathan Samways
Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si no es vd.el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. This message is intended exclusively for its addressee and may contain information that is confidential and protected by professional privilege.If you are not the intended recipient you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it.
Thank you Brett and Jared. Those are essentially the options I received on my FB group. We got people with good experience ? On Apr 5, 2025, at 2:30?PM, Jared Sankovich via <Sankovichj= [email protected]> wrote: ? Cnc mdf, mitered solid or an applied bead.? Those look cnc or mitered
Imran,?
1.That photo suggests CNC made the exterior bead.
2.For a more traditional technique, run some molded/bead edgebanding, and affix around outside perimeter?as trim detail.
3. Or route/plane the beads in the straights as close to corners as can be found, and finish corners by hand.
What is the best way to achieve a bead like below around the outside perimeter of the door?
--
Brett Wissel Saint Louis Restoration (at 314.772.2167 brett@...
|
toggle quoted message
Show quoted text
On Apr 6, 2025, at 5:52?AM, jontathan samways via groups.io <jonathansamways@...> wrote: ? Imran, the expression to plant on must be an British industry thing. I picked it up from the guy that taught me, he trained as a coffin maker, and he was taught by a wheelwright.
Kindest Regards
Jonathan Samways
Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si no es vd.el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. This message is intended exclusively for its addressee and may contain information that is confidential and protected by professional privilege.If you are not the intended recipient you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it.
Thanks Jonathan. This guy subs doors and drawer fronts to me. I told him he can’t afford me to apply the bead ?
So he is going to do that and I shared with him the methods he can try.
BTW, I am not familiar with industry terms. You and another guy (on my FB group) used the term “Plant”. I assume it means applied. Is there any more to it? On Apr 5, 2025, at 4:28?PM, jontathan samways via <jonathansamways= [email protected]> wrote: ? Imran. I have done solid plant on staff bead its a lot of work, and you have very little room for discrepancy, but it does look extremely nice. Most would add the staff bead to the frame, this way its easy to do any adjustment to the door. Kindest Regards
Jonathan Samways
Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si no es vd.el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. This message is intended exclusively for its addressee and may contain information that is confidential and protected by professional privilege.If you are not the intended recipient you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it.
Thank you Brett and Jared. Those are essentially the options I received on my FB group. We got people with good experience ? On Apr 5, 2025, at 2:30?PM, Jared Sankovich via <Sankovichj= [email protected]> wrote: ? Cnc mdf, mitered solid or an applied bead.? Those look cnc or mitered
Imran,?
1.That photo suggests CNC made the exterior bead.
2.For a more traditional technique, run some molded/bead edgebanding, and affix around outside perimeter?as trim detail.
3. Or route/plane the beads in the straights as close to corners as can be found, and finish corners by hand.
What is the best way to achieve a bead like below around the outside perimeter of the door?
--
Brett Wissel Saint Louis Restoration (at 314.772.2167 brett@...
|
imran