开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Felderownersgroup
  2. Topics

outrigger for KF700S

 

For the KF 700S the Felder catalog lists the 1300mm outrigger as standard, while also listing the three lenghts available for the slider.

Yet, I have been told that if you get anything other than the 8 foot slider, you must choose the 1500mm outrigger. Can anyone confirm whether or not I can order a 9 foot slider with a 1300mm outrigger??
 

I recently ordered a KF700S. I was considering a 2800 slider, ended up with a 3200 slider with 1500 outrigger. I did not explicitly ask about the 1300 outrigger, but I had the impression that it was an option. Your salesperson should be able to give you a definitive answer.?
--
Tom Gensmer
Heritage Home Renewals, LLC
Minneapolis, MN
 

Hi Acharya,
Although you haven't asked this, but having purchased the KF700S with 9' sliding table and knowing what I now know, I feel I would have been happier with the longer table.?
Also, removing the outrigger table is a PITA so I rarely do it.? Attempting to do any sort of jobs with the spindle moulder (with the outrigger in place) is frustrating.? Again, knowing what I know now, I would have purchased a seperate machine for my spindle moulder.??
Cheers
David
 

开云体育

Hi David:

I have separates so I have no experience using a KF700, but I’m surprised by your comment that using the shaper with the outrigger in place is a pain. For me — having no experience — I’d think you’d just move the sliding table along so that the outrigger is not in the way. Or if it is a sliding table locking thing, I’d just slide the outrigger along the p-channel, and out of the way.

What am I missing?

Thanks,
Lucky


On 19 Nov 2020, at 6:41 pm, david.r.milson@... wrote:

Hi Acharya,
Although you haven't asked this, but having purchased the KF700S with 9' sliding table and knowing what I now know, I feel I would have been happier with the longer table.?
Also, removing the outrigger table is a PITA so I rarely do it.? Attempting to do any sort of jobs with the spindle moulder (with the outrigger in place) is frustrating.? Again, knowing what I know now, I would have purchased a seperate machine for my spindle moulder.??
Cheers
David

smime.p7s
smime.p7s

 

David, do you have the outrigger cart? It makes? removal a 30 second procedure.


Jonathan



On Thu, 19 Nov 2020, 09:52 David Luckensmeyer, <dhluckens@...> wrote:
Hi David:

I have separates so I have no experience using a KF700, but I’m surprised by your comment that using the shaper with the outrigger in place is a pain. For me — having no experience — I’d think you’d just move the sliding table along so that the outrigger is not in the way. Or if it is a sliding table locking thing, I’d just slide the outrigger along the p-channel, and out of the way.

What am I missing?

Thanks,
Lucky


On 19 Nov 2020, at 6:41 pm, david.r.milson@... wrote:

Hi Acharya,
Although you haven't asked this, but having purchased the KF700S with 9' sliding table and knowing what I now know, I feel I would have been happier with the longer table.?
Also, removing the outrigger table is a PITA so I rarely do it.? Attempting to do any sort of jobs with the spindle moulder (with the outrigger in place) is frustrating.? Again, knowing what I know now, I would have purchased a seperate machine for my spindle moulder.??
Cheers
David

 

开云体育

I had a cart for my KF700 and as Jonathan said it is quick and easy.?? I don’t have the little ears on my 940 to use the cart so I was considering selling it, where are you located?

?

From: [email protected] <[email protected]> On Behalf Of jontathan samways
Sent: Thursday, November 19, 2020 8:47 AM
To: [email protected]
Subject: Re: [FOG] outrigger for KF700S

?

David, do you have the outrigger cart? It makes? removal a 30 second procedure.



Jonathan


?

On Thu, 19 Nov 2020, 09:52 David Luckensmeyer, <dhluckens@...> wrote:

Hi David:

?

I have separates so I have no experience using a KF700, but I’m surprised by your comment that using the shaper with the outrigger in place is a pain. For me — having no experience — I’d think you’d just move the sliding table along so that the outrigger is not in the way. Or if it is a sliding table locking thing, I’d just slide the outrigger along the p-channel, and out of the way.

?

What am I missing?

?

Thanks,

Lucky

?

?

On 19 Nov 2020, at 6:41 pm, david.r.milson@... wrote:

?

Hi Acharya,
Although you haven't asked this, but having purchased the KF700S with 9' sliding table and knowing what I now know, I feel I would have been happier with the longer table.?
Also, removing the outrigger table is a PITA so I rarely do it.? Attempting to do any sort of jobs with the spindle moulder (with the outrigger in place) is frustrating.? Again, knowing what I know now, I would have purchased a seperate machine for my spindle moulder.??
Cheers
David

?
 

开云体育

I have the KF700SP with the 10’6” slider, and the 4’ outrigger. Sorry, I don’t think in metric, so I just used an imperial tape measure to get rough measurements.?

I remove the fence from the outrigger, and slide the outrigger as far to the right as it will go. Then I use the shaper with the power feeder with no problems. ?The outrigger support arm is a tripping hazard that one must adjust to. It’s not an ideal solution, but it works for me.?

When I do freehand shaper work, I remove the outrigger so that I can work without the tripping hazard. So far, no problems.?

Like many of you, I agree that separates are the best option if space and budgets allow.?

Stay safe,

Alex





On Nov 19, 2020, at 12:41 AM, david.r.milson@... wrote:

?Hi Acharya,
Although you haven't asked this, but having purchased the KF700S with 9' sliding table and knowing what I now know, I feel I would have been happier with the longer table.?
Also, removing the outrigger table is a PITA so I rarely do it.? Attempting to do any sort of jobs with the spindle moulder (with the outrigger in place) is frustrating.? Again, knowing what I know now, I would have purchased a seperate machine for my spindle moulder.??
Cheers
David

1 - 7 of 7