开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Felderownersgroup
  2. Topics

Parts list for Jointer guard arm

 

开云体育

My book for Dual 51 does not include the parts list for the spring loaded arm that has the cutterhead guard. See pic below:

image0.jpeg

There is a bracket (has been removed in above pic) that mounts under the elevation knob and I would like to have the typical assembly drawing and part numbers if anyone has them.

Thanks,

Imran Malik
 

开云体育

Hi Imran:

?

Does this help?

?

Warm regards,

Lucky

?

Dr David Luckensmeyer

Designer & Maker

@luckensmeyer

M: 0413 013 115

?

From: [email protected] <[email protected]> on behalf of imranindiana via groups.io <imranindiana@...>
Date: Friday, 8 November 2024 at 07:51
To: [email protected] <[email protected]>
Subject: [FOG] Parts list for Jointer guard arm

My book for Dual 51 does not include the parts list for the spring loaded arm that has the cutterhead guard. See pic below:

?

?

There is a bracket (has been removed in above pic) that mounts under the elevation knob and I would like to have the typical assembly drawing and part numbers if anyone has them.

?

Thanks,

?

Imran Malik

Dual 51 Extract.jpg

 

开云体育

Hi Lucky,

What you shared looks like my booklet but it does not include the arm to which the guard is mounted. The guard itself is included on a separate page. Kind of strange to not include this.

Imran Malik

On Nov 7, 2024, at 5:31?PM, David Luckensmeyer via groups.io <david@...> wrote:

?

Hi Imran:

?

Does this help?

?

Warm regards,

Lucky

?

Dr David Luckensmeyer

Designer & Maker

@luckensmeyer

M: 0413 013 115

?

From: [email protected] <[email protected]> on behalf of imranindiana via groups.io <imranindiana@...>
Date: Friday, 8 November 2024 at 07:51
To: [email protected] <[email protected]>
Subject: [FOG] Parts list for Jointer guard arm

My book for Dual 51 does not include the parts list for the spring loaded arm that has the cutterhead guard. See pic below:

?

<image001.jpg>

?

There is a bracket (has been removed in above pic) that mounts under the elevation knob and I would like to have the typical assembly drawing and part numbers if anyone has them.

?

Thanks,

?

Imran Malik

<Dual 51 Extract.jpg>
 

开云体育

Hi Imran:

?

Right you are. This is the only picture I can find – I assume you have the same. It is strange.

?

Warm regards,

Lucky

?

Dr David Luckensmeyer

Designer & Maker

@luckensmeyer

M: 0413 013 115

?

From: [email protected] <[email protected]> on behalf of imranindiana via groups.io <imranindiana@...>
Date: Friday, 8 November 2024 at 08:37
To: [email protected] <[email protected]>
Subject: Re: [FOG] Parts list for Jointer guard arm

Hi Lucky,

?

What you shared looks like my booklet but it does not include the arm to which the guard is mounted. The guard itself is included on a separate page. Kind of strange to not include this.

?

Imran Malik


On Nov 7, 2024, at 5:31?PM, David Luckensmeyer via groups.io <david@...> wrote:

?

Hi Imran:

?

Does this help?

?

Warm regards,

Lucky

?

Dr David Luckensmeyer

Designer & Maker

@luckensmeyer

M: 0413 013 115

?

From: [email protected] <[email protected]> on behalf of imranindiana via groups.io <imranindiana@...>
Date: Friday, 8 November 2024 at 07:51
To: [email protected] <[email protected]>
Subject: [FOG] Parts list for Jointer guard arm

My book for Dual 51 does not include the parts list for the spring loaded arm that has the cutterhead guard. See pic below:

?

<image001.jpg>

?

There is a bracket (has been removed in above pic) that mounts under the elevation knob and I would like to have the typical assembly drawing and part numbers if anyone has them.

?

Thanks,

?

Imran Malik

<Dual 51 Extract.jpg>

Untitled.jpg

 

开云体育

Found one in 700 series books.

image

Imran Malik

On Nov 7, 2024, at 5:44?PM, David Luckensmeyer via groups.io <david@...> wrote:

?

Hi Imran:

?

Right you are. This is the only picture I can find – I assume you have the same. It is strange.

?

Warm regards,

Lucky

?

Dr David Luckensmeyer

Designer & Maker

@luckensmeyer

M: 0413 013 115

?

From: [email protected] <[email protected]> on behalf of imranindiana via groups.io <imranindiana@...>
Date: Friday, 8 November 2024 at 08:37
To: [email protected] <[email protected]>
Subject: Re: [FOG] Parts list for Jointer guard arm

Hi Lucky,

?

What you shared looks like my booklet but it does not include the arm to which the guard is mounted. The guard itself is included on a separate page. Kind of strange to not include this.

?

Imran Malik


On Nov 7, 2024, at 5:31?PM, David Luckensmeyer via groups.io <david@...> wrote:

?

Hi Imran:

?

Does this help?

?

Warm regards,

Lucky

?

Dr David Luckensmeyer

Designer & Maker

@luckensmeyer

M: 0413 013 115

?

From: [email protected] <[email protected]> on behalf of imranindiana via groups.io <imranindiana@...>
Date: Friday, 8 November 2024 at 07:51
To: [email protected] <[email protected]>
Subject: [FOG] Parts list for Jointer guard arm

My book for Dual 51 does not include the parts list for the spring loaded arm that has the cutterhead guard. See pic below:

?

<image001.jpg>

?

There is a bracket (has been removed in above pic) that mounts under the elevation knob and I would like to have the typical assembly drawing and part numbers if anyone has them.

?

Thanks,

?

Imran Malik

<Dual 51 Extract.jpg>

<Untitled.jpg>

1 - 5 of 5