开云体育

This weeks poll is whether you are using Metric or Imperial measurements. I have heard that it is good to use Metric for the shaper, but what about the rest of the machine? ---- Please select one of

Hi Neil, I just place my order last week for a K700S Professional Sliding Table Saw. Here is some info from Peter Rodgers some of which is probably relevant to the new

From what I hear and also from a picture of one in the Christmas catalog, the BF6-31 will be replaced some time this year with the CF700 series machine. It's supposed to be pretty much like a "7"

Niel; Good question. I'd like to hear more about this. Perhaps Renzetti at Felder East can fill us in. Regards, Mark Rupersburgj Niel Viljoen wrote:

Thanks to the invitations of Geoff Shepherd and John Renzetti I have signed-up although I have not yet bought my Felder, hence my question in rec.woodworking. What intrigued me was the mention the

Group - I thought this might be of interest to some of you. If not, just hit delete. This is the beginning of a conversation thread over on the rec.woodworking newsgroup via Deja.com. You can

Jim, I've always used the Fluidum, which came in the little care kit with the KF7F. I don't know what's in it, but it works great. One product to stay away from is some stuff called slip-it.

Dear Jim, You should put any lubricant that contains oil, silicon or similar substances on the rails. These substances attract dust and will create residue on the rails. We recommend any lubricants

My sliding table seems to have a little more friction than before. I found some oxidation on the rails and cleaned that off, and would like to protect it. I had heard that you are not to put any

I've got the top of the AF22 frame 42.5" off the floor. This has allowed enough room so the bags can have some support as they fill. The regular Felder bags that came with this machine were pretty

Geoff, Before getting your message, I spoke to Pete at Felder, he said that the measurement was 33 1/2 inches - but this was the smaller unit, he said that the bags are the same size. I mounted it at

Scott, I assume you mean the AF-22... mine is mounted on the mobile stand, but John Renzetti has his bolted to the wall. The height from the bottom of the collector housing (where the bags attach) to

Hi Group... here's an idea I wanted to try on the tilting shaper using the high-speed spindle - sliding dovetails. Usually a sliding dovetail is done in two steps, one to mill the dovetail groove, and

Hi guys, The new monthly special is now uploaded. I hope I picked the right mix for you. Wolfgang FELDER USA

Thanks to John Hartshorne's over-the-phone advice, I was able to get the system-format aluminum extension table perfectly aligned with the dovetail coupling system on my BF6-31. Using my parallel

Geoff Shepherd wrote: It may be that some keep a Unisaw used just for dados and big, ugly ripping. My shop isn't big enough to 2 saws -- unlike some in the PHL area ;-) Last year I hand dug 90

Geoff; This sounds (get it?) like a question for the manufacturer. It seems like anything that was exposed to a shop environment could be crudded up. Maybe Kay has a LN option -- like on your

Hi all, When I start up my Kay MA-1 Phasemaster, it sounds like it has bad bearings (whining) until it warms up a bit. This unit was never used, but sat for two years on its pallet before I purchased

Well, we're officially at 40 members. I closed the poll for the dado survey, and the web site sent out a results message that isn't terribly clear... the number after each option is the number of

Here are the results of the vote: 1. H.S. spindle, Hersaf bits 1 2. Multiple passes with saw blade 1 3. Slotting cutter in shaper 1 4. H.S. spindle, spiral bits 3 5. Hand-held router 4 6.