开云体育

…and technically, these two actions relate to ? changing ? the geometry of the cut, as opposed to solving an issue related to the machine having ? lost ? its calibration. The joys of

technically that'd be 3 calibrations......two re-calibrations. D

Things could be worse - coulda bought something from laguna. D

Well, this is good as far as it goes. However, there are systemic customer service/post-sales issues with Felder that this response does not address.North America Felder is too proud of their products

Excellent! Hope it works. Chris Rozycki

Hi Richard, I only recalibrated mine once in 13 years because I was making flooring and didn’t want a sprung joint. Afterwards I reset it to a slight sprung joint. I guess technically I have

*This evening I sent this email:* Dear Mr. duToit, Allow me to introduce myself.? I am the reason you and all Felder Employees have jobs and a place to live and money to pay for food.? I am a Felder

With what frequency should I expect to calibrate the jointer infeed/outfeed tables on my a3-31 (2007 vintage)? My workflow is quite mobile: I move this machine in and out of its parking spot under a

Can you superglue it back together? Mine was broken and was glued together and has been fine.

I recently bought Brian’s DRO flip stop and one DRO parallel fence. Both are very well made and very handy. Easy to install, too. -- John Hinman Boise ID K700S and A941

Richard, I ordered the kit you referenced as well as a 1300mm fence (and additional flip stop) when I bought my B3. So far, I have used Tim’s approach (bevel angle) to set the fence. The 90 degree

That’s not quite correct, if you want to read over a meter you have to set the resolution to be .1mm (.004”) and you can read to 9999.9, so almost 10 meters. It’s due to the display only using 5

Thanks Steve. I already have a profile made out of oak, ready to go. J.

Brian’s digital stop is fantastic! Very good, and has improved my woodworking. Only complaint is that the readout in metric only goes to a meter. I have to get the calculator out and figure the inch

Here are pics of my Incra modification: What I did was mill a piece of UHMW so that it press fit into the T-slot on the table.? I then drilled and tapped 4 holes for the bolts on the miter gauge

Hey guys, just wanted to know if anyone has an extra measurement magnifying glass that goes on the flip stop for a K700s? I broke one and need to replace it! Also thinking about getting a DRO flip

I have the same situation as habacomike with my DC40 feeder: unless the feeder is parallel to the slider, the feeder does not have sufficient leverage to overcome the resistance of the gas strut, so

Jay, Well said. All the woodworkers I met online and in person, all are nice, great people, patient, helpful and accommodating. I have Felder machines (Felder 700 saw/shaper combo, AD741 and FB510),

When all other reasonable and diplomatic means of resolution fail the legal approach has worked for me.? I spent $15k on a piece of machinery and had issues from the get go. Called dealer, he called

Yes, I would like to see the modification to use Incra on the slider too cause I am planning to do it this weekend. My plan is to mill a 20.25mm x 20mm hardwood to fit my Felder 700SP saw/shaper