开云体育

Steven, My 2002 KF700 hood is 240mm and the table opening is advertised to be 9” but it might be slightly bigger. Largest tooling I have used is 220mm w/o issue. Imran Malik

This is the first groups.io/email group I've joined. I'm curious how many folks directly use email to respond to threads rather than the UI? And if there is anything else that makes this format more

Dave, Minimax owners on groupsIO Mark Foster

Steven, Others with more experience will pitch in with more detailed info, but here is a bit of what I have experienced. With the tenoning hood (and plate associated) I can run a 250mm (actually a 10

Thank you, Imran. The reason I ask is because I own the Felder dado set, and I'm in the market for a shaper. It's helpful if I can limit the amount of tooling costs up front until I figure out my work

Matt, These stickers refer to the shipping bolts which lock the trunnion in place during shipping. You'll need to remove these so you can use the arbor tilt. Do not attempt to tilt the arbor without

Where is the minimax forum? Dave Davies

4K for a good condition Moak is a very good price. Dave ________________________________ Sent: Saturday, May 20, 2023 11:18 PM To: [email protected] <[email protected]> Subject:

This is the main forum I visit. ?I have been on sawmill creek and find it useful for info on hand tools and some general woodworking topics (and have seen posts by some of the FOG "regulars" there).

sawmillcreek.. woodworkforums.com, minimax, occasionally I hop on woodweb.

I’m also on woodworkforums.com it’s an Australian site but has people from all over the world ,including hammer and Felder and combo users. Broad user base. I’ve been on there since 2011 or so.

That was an easy fix - thank you! Still haven't figured out the warning sticker though...same as shown on Tom's saw in the table post. wrote:

Sorry all for the poor quality image. Roger

I recommend you read this earlier post related to your situation: /g/felderownersgroup/message/128813 <- Explains how to adjust out the cast iron top dip near the saw arbor on a KF700

I think that it does…the circuitry does not provide for selective braking.. If you hit stop then immediately remove the power so the brake module has no effect, I think you will find that the saw

I think it is because it’s the background picture on the first page. Go to “level” along the top edge of the screen, on the computer, not sure where that shows up on mobile phones. Brian Lamb

https://lambtoolworks.com/level? Lamb Tool Works lambtoolworks.com How bizarre. Copying the link to Brian’s precision level brings up the parallel guide picture. Still, follow the link for a very

I follow Minimax as well, I have a MM16 bandsaw. It is not nearly as busy or helpful as this group. Mark Foster

Other than this Felder Owner's Group, what other tool forums do you follow? I'd be interested to see if they have discuss similar issues as with some Felder products.