开云体育

I am not sure how this will work with Hammer but I had my friend modify the 3D printed DRO holder (shown in attached) for the M503 chinese DRO which is like $60-70. I will be adding this detail to the

I like it but worry about pulling the fence off the table. how does the readout disengage?

I also have an analog wheel on my a3-31 and never had any issues with it. Would recommend. I put a wixey dro on my supermax drum sander and it has been accurate as well, but to be honest I find the

Rob I agree the analog hand wheels are quite accurate I have had those on many a felder . Always matched up nice with caliper only problem is they are so high tech and expensive?

Hi Dan, the positive traits you mention for the Wixey are true. I have the standard Felder gauge in the hand wheel, accurate to 0.1mm, repeatable, and it never requires batteries. I would go with it

Thanks for the feedback Jason. It definitely wouldn’t pencil out from the perspective of generating a return on the heat produced from the pucks. I have a Woodmizer sawmill, so that side of the

I put the Wixey on a Powermatic planer, and love it. Easy to install, and the readout can be located at any convenient location. Easy to set - actually easier than the DRO on my Lamb Tool Works

Ed, My lumber supplier, a smallish one man operation-makes a hell of a lot more sawdust than my co-op shop. He went down the briquette press rabbit hole. He heats and runs his kiln on wood. After

Joe, Sorry that I missed you too!? It ended up being a busy week for me. The people at Shaper are really deep into support.? He talked hinges with me for 10 minutes and the files in the system

Ed, There were several booths with briquetteing machines.? I have no way to use that in So Cal, so I did not look. PK

PK, sorry I missed you at the show. I spent some time at the Shaper O booth. I have gen1 and the only differences I saw was gen 2 is easier to Z touch and the base is not rounded up at the edges.

Interesting development in the heavy duty large cart search. Rangate got back to me with details on the heavier duty hs500 and hs600 series carts. I thought you guys might be interested in seeing

If this helps, I have the Felder one on my Hammer C3 and yes it’s analog but it’s really handy. I saw that someone else in here put a Wixey on their table saw fence which sounds awesome. I’m

Great idea! Which Wixey product is that?

That’s a great looking bench Taylor. Is it easy enough to mount some heavy duty castors in place of the metal roller wheels?

PK, did you happen to see any briquette presses for a small shop. Dragging bags of sawdust out of the basement through the snow to dump in the woods is getting old. The mud in the summer has made me

Michael, After talking to the Shaper people, they convinced me that gen 1 was sufficient for me.? The screen is slightly larger and has higher resolution but after using the gen 1 it seems to not

Ibsenafshar, Thanks for this information. Seattle is not that far from me. This is good information to have. In 2009 Felder supplied upgraded modular electronics for my 2000 CF731 and walked me

Hi Dan. Can you send me an email ( egmiii@... ). We can setup a time if you wanted to stop by to see the Barth and Rangate carts. I can also get a few questions answered on the speed sander. I

If you want a full size bench that is semi mobile get one of these: Handy lift (