开云体育

Hi Steve , Great!! Have you run into my son Jasper? They are always looking for Builders . Best mac,, martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell

Mac, since owning your clamps I have no need for these other items! Steve

Hi Steve Why are you selling these parts? Mac,, martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com

There isn’t enough time in the day to reminisce of 54 years of buying and selling machines. 10 years ago Dynamaster vertical Brown And Sharp shows up in a blizzard 10 below and nasty , Russian

I'm using a BF6 but this question is aimed at those who are more proficient than me at using spindle moulders in general (that's most people here, I suspect) rather than a specific machine model. I'm

Here is a decent example for the OP to consider. I nearly considered going through the hoops of buying this machine below, simply because the deal is good enough. I dont need a freestanding shaper. I

Clamp is sold. Thank you. I also have a Felder edging shoe that is brand new that I do not need. Make an offer if you're interested. Steve

I bought my second machine used - it was lightly used and needed some adjustments but no issues. I actually just rented a hydraulic lift trailer and used a pallet jack to load and unload. No drama -

I purchased an F700Z shaper from a fellow here on the FOG. He sent photos and we facetimed to discuss and look over the machine. That took away a lot of the worries. He was able to build a crate for

I only had one bad experience buying sight unseen and that was a IRS auction. Recovered from it though. Mostly good experience from private sellers. New or use I only ship one way truck. Costs more

Posting this again. Make me an offer if you're interested. Brand new Felder eccentric clamp with mounting flange. Never mounted, still in original packaging. Steve

Thanks Bill. I’ve noticed that mine does change, however, generally takes five minutes or so to make its mind up.

There is a lot of information on the cheaper dust monitors on the Australian Woodworking forum and they are surprisingly good. That forum has the most dust extraction information for hobbyists in the

I bought a lovely sliding saw/shaper from a gentleman in this group. We did a facetime where he walked me through the saw, answered all manner of questions, and showed it running. In terms of moving

I'll second what Marlowe said and add that if possible, I freight the machine point to point, either crated or shrink wrapped. Terminals are horrible places built to damage machinery by forklift

I've bought many (most of my machines actually) used and remotely. It is indeed a gamble, but I beleive worth it if you are careful (luck plays a part...). Like David K. says, you want to have enough

It is instantaneous for the Dylos on the display, clean air I read 100/10 - medium I read 500/50 or so - bad this is in the 2000/400 or so when I forgot to open a gate. There is no calibration, as far

David, as you most probably know I introduced Clearvue to Oz and I very rarely sold any filters at all. The separation is so good no dust can be seen in the exhaust and no dust settling is evident at

I very much like having the two DROs and the precision mitre index system. However, as mentioned, the upgraded crosscut fence is extremely heavy. The cart for removing the outrigger and fence as a

I purchased my KF700S used, based on a heads-up from Imran on this group and its eBay listing. I live in Saint Louis, MO and it was located near Austin, TX. I was pretty apprehensive about dropping