开云体育

HI Pat: I’m not sure whether you’re directing your “it’s been five years” email to me or someone else, but for sure I had a lot to say about the poor dust design of the Kappa 400. Has it

A good level has a thousand uses… Super nice bench, well done! Brian Lamb blamb11@... www.lambtoolworks.com

nice bench and well done ? Imran

I'm between projects so I decided to flatten my Roubo workbench.? I started by using two levels, one yellow and one black, as winding sticks.? With my old eyes I found it difficult to see the twist

I am applying it in shop . First time used the niosh ov/sd/hc/cl filters on my mask. These are ~15 yrs old. Did not smell a thing until i took them off before leaving the shop, so I guess they work. I

It’s great stuff. The first coat dries in a reasonable amount of time, depending on your weather conditions, but subsequent coats take forever to dry if you do full coats in cold temperatures, so

I have no great experience in finishing but I have to say that I have not used anything that is so easy and quick to apply. Off course I have only applied the first coat and 3 coats are required but I

Greg: Are any of the Rangate items still available? If yes, which ones? Thanks, Fred Rossi

Yup, rear corner of the intake side. I have been pulling the bin before i can see the chips in window and still get the pile on floor. I have pulled the bin way before it is full and can see the it

This is the tap and die holder I made for my lathe - including drawings if you want to make your own. Adjust a bit more sophisticated than Joe Pie’s. https://www.flickr.com/gp/davidpbest/gn391W

Imran, Did overfill the bin today and I got a lot of dust falling down when I pull the drum. As the bin was more than full on the right (where you have the intake in my RL140), it makes sense for the

I had not given this much thought, but it takes 2 to bid something up. It was stated that the winning bid has no buy/sell history. How about the other party that was involved? Imran

Yes – Same here although it’s in my back yard in Austin, TX. Regards, Chris Perren Sent: Saturday, January 2, 2021 12:49 PM To: [email protected] Subject: Re: [FOG] Broken Tap David Best

David Best introduced me to this channel on youtube and I'm working through his videos in preparation to start playing with a new mill and lathe. Found this video and wanted to post here as an

I know, that’s why I just gave up after trying 5-6 times. I was just shocked to see it go up to nearly 2k

I have a couple Balcrank that work fine for many years martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com

Jason. same for the accounting business. At 66 there are still parts I really enjoy and parts I have less tolerence for the ever. Signs of aging. The work ethic thing is what bothers me and my clients

Perry White sure wasn't a woodworker. I've been at it 25 years now and I enjoy it as much as ever. Sure there are parts of running a business I don't care for, but that would be the same in any case.

I have to say this takes Frugality to a new level , thanks for the tip LOL ?mac,,, martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell

Todd, I feel a lot better knowing that the switch came from Felder. It may be a pain but i am sure you will get it right. I have a feeling that Joe is right. If they sent it with jumpers, those were