开云体育

They will be narrow enough once folded to go into the 16"-18" depth of the cabinet as well. Disadvantage is the Soss hinges might be visible to the whole world on the edges when folded though. Check

Actually good point, making the two doors bi-fold would limit them being out of proportion, that's a way to make them small enough to not be problematic - thanks for that

So, you want four doors to look like two? And then they have to retract into the cabinet? Maybe Soss hidden hinges on the two halves and then use flipper dooor hardware for the two assemblies. Brian

I'm looking for expertise on flipper doors, applicability, caveats. Considering a project and concerned that a 2-sidemount door cabinet opening will be too out-of-proportion when open, but still want

I too am interested so please count me in. Ted Earnhardt

I made a folder in the Photos tab titled Hammer K3 Winner Schematic/Wiring diagram. I will also attach a .jpg here.

Photos are commonly attached. Be sure to save it in a picture format (jpg, png, etc) first. I see .htm extension, which may be the issue. Imran Malik IAM Wood

Hi Kevin, I just get a black screen with menu option when I open the attachment on my iphone. Same result if I save it in files. Imran Malik IAM Wood

It looks like the image doesn't load. Do I need a particular file type?

Thank you Imran. I'm attaching an image of the schematic/wiring diagram that came with the K3 Winner. Some have asked to keep this topic public in the event the solution will work for

Hi Imran, That’s interesting to know. When I get back to the shop I’ll have to see if I have one in that groove. Thx, Wade

Hi Mike, Can you confirm that the table itself is flat but you see the variation on the dial gauge as you described? Imran Malik IAM Wood

Just so you know, Felder tables are extruded and then machine hammer tables are extruded martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330

Tables pretty light duty what I would do is put it between two sawhorses and stand on it. You have to jump on a little bit. That should straighten it out unless you have a

I have the same sliding table, though on a K3. I have never attempted to measure how flat the sliding aluminum table is along its length--which is what you're referencing, if I understand correctly.

I highly recommend looking up changes your whole outlook on life martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330

That’s what cat litter is for martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330

Hi Wade, There is a stop on the 1100 xcut fence. This is the only way to keep the scale accurate. The stop goes in the channel where blocks slide. The stop had a set screw fixing its location. The

I'm going to have a two post lift and do auto repair in the front half of that picture and I don't want to get the concrete stained. Dave Davies [email protected]> wrote:

My question is why what’s wrong with the nice concrete floor you’ve got seems like a nice to me. It’s a shop floor. It’s not your kitchen. martin/campshure/co/llc mac campshure 7412 elmwood