开云体育

Glen, The outrigger table options are indeed confusing. Let me try to clarify: The 1300 and 1500 outrigger tables are basically the same except 1300 is 200mm less wide and only works on sliding tables

Glen, The outrigger table options are indeed confusing. Let me try to clarify: The 1300 and 1500 outrigger tables are basically the same except 1300 is 200mm less wide and only works on sliding tables

Thanks James, and thank you for the numbers on the scoring motor as well. I'm still not sure how much cross cutting I'm going to do on this machine, other than panels. I get spot on repeatable cross

Thank you. I've seen the configurator, but without the background details, it's not terribly useful. So many of the items have similar labels, if you're not already a felder expert, you get to feeling

My 2013 KF700S (painted green so not the current model) has the 1500 outrigger and it does not interfere with the power feeder when the tilt table is in the down position. I am not a strong man and an

Damn your fast Glen

Hi David So I haven't said anything lately, I have just been read your and everyone else s posts and I have gathered a wealth of information. I have looked at some of the other stuff you have

The scoring motor is 1 HP (0.75 kw). James [felder-woodworking] <felder-woodworking@...> wrote:

Michael, Let me refer you to the configurator for the KF700: http://www.felderusa.com/us-us/products/saw-shapers/sawshaper-new-kf-700-s-professional.html

Yes, check David Best's album https://www.flickr.com/photos/davidpbest/albums/72157671055139816 On the heavy crosscut fence, you could have 3 DRO. The standard one with the stop on the left, then the

Thanks for the clarifications David. You are correct I was planning on the mechanical scoring unit because I didn't want yet another motor to run on my limited power budget. Does anybody know what the

Michael, Let me clarify a few things. I assume you are considering mechanical scoring because of your off-the-grid power consumption limits. If you have the power for electronic scoring (it’s a

I didn't realize you could get a DRO on the fence. Do you mean a DRO on the stops on the crosscut fence, or a DRO on the table-saw style rip fence, or a DRO on Felder's slider rip fence? (There are a

Yes, the current single phase KF700 has separate scoring unit. James [felder-woodworking] <felder-woodworking@...> wrote:

Michael, I have 3 phase 7.5HP KF700SP with a 9 foot slider. Before I placed the order back in March, I also got advice from David Best. I took all the advice from David Best regarding the machine

My KF700S (circa 2013) has single phase motors. When I first replied to you I assumed that option was still available, but did not look at the current specifications to check. Sent: Saturday, December

My K700S has the separate motors and adjustment at any height but were only available with 3 phase, ?don't know if this has changed since 2010. Just on a side note, I always run my blades at full

I have a KF700S with (I guess) the precision miter system (it keeps the ruler on the fence reading accurately as you change angles—but only for the designated “standard” angles). I make a lot of

Wow, my manual has a trianglar "planer" fence (which I have) and a "tablesaw fence" (which I don't have). Are you all saying neither are good? Does that go for the current fences? Assuming they could

Michael, I have the separate scoring unit and it raises and lowers its own trunnion assembly very nicely. Stays aligned beautifully. It was worth the few bucks more. John ~ John ~ H&H Woodworking