开云体育

I use Outlook Express, if this provides a clue.

A few threads back I posted a message on how the messages run off the edge of my screen and I have to use the scroll bar to read them (PITA). I have since noticed that not all message do this. The

I have the Oneida 1.5 unit also. I chose this system over a larger "central" one, figuring I'd just add another collector or 2 as I needed , or as I added tools. I've had mine for over a year, and I'm

Art, How about writing something up on this and put it in the articles section for future reference to all. While I'm at it how about an article on how you use the vaccufence on your machine. I'm on a

Dear Steve, I am a woodworker, a future Felder owner in the someday category, and I am a self-proclaimed expert on sound proofing. My research on sound proofing started 15 years ago when we set out to

I've got the 1.5 hp Oneida up and running in my shop, with total runs to 30' (6" metal pipe throughout, bushing to 4" @ flex lines...) - it does a great job on the Felder saw with simultaneous

Everyone is contributing good material...my 2 cents is to consider 3HP and above dust collectors. Mine is 3HP and after accounting for all the losses, I expect to be marginal in terms of air flow.

Hi Steve. I'm brand new to the group and started reading the posts. I do not currently own a Felder (or any machine for that matter), but am looking into it. I can not help you with dust collection

Congratulations! I am waiting for my CF-741 Pro, it should be on its way from Austria by now (Wolfgang?). Regarding dust collection, I would suggest the Felder system. I used to have a Hercules

Hi Steve, Welcome to the group, congrats on the new machine. I have the older version of the AF22, which while powerful is very noisey. The newer AF22LN is rumored to be very quiet. In fact one of our

Congratulations on the engagement. If your wife says you or the machine has to go sometime in the future, I'll trade you my Robland X31 for the new Felder. In regards to dust collection, in todays

For those Felder owners using the Oneida 1.5 HP cyclone I have a few "tricks" that make changing filters much easier. E-mail me directly if you are interested so we don't bore the rest of the group.

as of today, I'm engaged to a new CF-731 Pro. If you haven't seen what this package includes, you really should. It should be no more than 3 months until I get to consumate the wedding. Of course, my

Hi Steve! Welcome to the East Coast Felder Club. With respect to dust collection - I have an Oneida 1.5HP cyclone unit that has no problem keeping up with all my equipment including a 25" Woodmaster

The new inverters are limited to 4HP due to space requirements in the electrical compartment. Therefore the industrial scoring unit, which has a 1HP motor, still will not be possible with the 1 phase

Please take me off of your mail list for the next couple of months.

Wolfgang: When a VFD, is installed on a machine, and an industrial duty scoring motor is also selected, how does Felder handle the speed of the scoring unit? Will there be two drives, one for the saw,

Two words: I'm drooling! ;-) Are those speeds correct on the shaper? It looks like you have the ranges mixed up (slow/med/high). Can this system be just as economically retrofitted to my BF6-31 by any

FELDER offers now also another option for woodworkers with single phase supply. All 700 Series machines (except ECO models) will be equipped with an Inverter. The inverter converts 1 phase power into

I don't know if this is old news, but I talked to Wolfgang at Felder USA today and he told me that there was a fire at the Felder factory's paint shop a few weeks back which caused the factory to be