开云体育

I made my own FAT/MFT table by laminating two layers of 3/4" maple plywood and then a 3/4" solid maple piece for the border.? Drilled out all the hole using a cheap Bora Centipede MFT table as a

Could be a challenge to do on a widebelt and not have it just 'spring' back after you run it through.? The rollers have some significant pressure. I am buying some 1" Baltic Birch for a project and

Not sure how wide it is but you may be able to send it thru a WBS. Local shops here routinely run material thru WBS for a charge. Imran Malik IAM Wood

Great idea Brian! But the top is too crooked for that. Not sure if the picture shows it. The metal frame is fine but it looks like the plies are uneven.? Bill

Can you shim it where it bolts to the frame? Brian Lambblamb11@...

I really like my Fat 300 for lifting stuff. But the top is not flat and when I try to build something on it I don't have good results. I wonder if I just got a bad top, or if others have replaced

The clamps have been sold. Thanks all! B+ [email protected]> wrote:

Hi Brad, I'm interested. Can you email me please? Cody@...

Aaron, As I mentioned I struggled between DPS (303-1551) and non-DPS (303-1554) models both IP54. I chose DPS for absolute position. I have not re-zeroed since I purchased it; which was Jan of

I resisted commenting on about the Shars Aventor calipers, but I also bought and returned two units thinking the first one could be an anomaly. This further underscored my shop policy: “Nothing

Well, the Shars IP67 had problems.? I'm actually going to return this because I don't like how it works. ? One thing I discovered is that you have to re-zero the caliper every time you turn it

Also, as I mentioned in my first post, I prefer CR2032 due to its higher capacity. Once I replace my 6” caliper, all 3 calipers will be CR2032. Imran Malik IAM Wood

Brett, I’ve used the Mitutoyo calipers for 3 years with the same batteries. Bill Belanger

Brett, Am I just lucky or just a light user. My 6” no name caliper from Grizzly is 25 yrs old and I probably have replaced the LR44 battery 4 or 5 times. Granted in the first 20 yrs it was seldom

Are there any recommendable, "value line" USB rechargeable versions of these digital calipers out there? I find batteries the weak point on the worst and best ones I've

I had the same as David, reset and all seems to be working now. [email protected]> wrote:

I also got two erroneous messages recently about “account bouncing” which unbeknownst to me, shut down email delivery for several days and required a reset intervention. David Best - via mobile

Is it possible you have something lodged in there somewhere. The first video at least, sounds like it could be a bit of material contacting the cutterhead or

I had the same message - longer in directly without the link and it seemed fine Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ Sent: Thursday, April 10, 2025 9:28:30

Brian: I got an email from groups.io saying there was a problem with my account and that I had to reset it which I did. The messages are coming through now. I think there might have been a while they