开云体育

I have the Harvey Shark mounted to my K3 Winner 79x48.? It was expensive, however the quality is there, in my opinion.? This thing is solid!? It is also very adjustable, which I guess is good and

Hi. I have the Grizzly but I should have bought the Harvey Shark. The Grizzly works okay if you just want to save money. The Shark looks to be better built. Just my opinion. I have a Hammer 79’

Anil, I was thinking about buying a 500V. Curious how you think the build quality isn't as robust as it used to be? Thanks Dave Davies [email protected]> wrote: -- Dave & Marie

What is the best way to achieve a bead like below around the outside perimeter of the door? Imran Malik IAM Wood Creations https://www.facebook.com/groups/362481112015700/?ref=share

Thank you and that is helpful. ?Will likely get the Harvey but just want to make sure my expectations were in line with the improvements. ?Appreciated! -- Mike Hopkins

Mike, You intend to go from the Euro guard to the overhead guard. This has been discussed here so you should be able to find info by searching. I made the switch because I did not like removing the

Today I just hooked my blade guard dust port to my DC and removed the shop vac that had been collecting dust for the overhead portion for the dust collection. ?This is a temporary situation and I am

You're probably right, David :-). Interestingly, a few years ago I was stupid enough to sell the 500V when I was moving homes and ended up buying the next version of it recently - much more expensive

Ah okay, thanks Lucky, I had not realized that. ?Usually I only move it when I reconfigure my shop, though I’ve done it a few times this year :-) Anil

Ven 4 apr 2025 05:36 Brad Wall ha scritto: How much would a possible shipment to Italy cost?

Just be aware that the multipress is not rigid enough to be moved on a regular basis. It loses calibration alarmingly quickly. I have the mobility kit but no longer move the press because of the

You know you're going to kick yourself later if you sell it. Check with Joel Gelman. He used the space on the back side of the multipress. I can't remember exactly now what he did but I remembered

Hi Michael The press is ~10' wide and 3.5' deep (4' when using the case support arms) and ~90" tall.? ?The mobility casters make it super easy to roll around. Anil

You don't appear to be bouncing from what I can see, so you should be getting messages if that is what you are signed up for, individual messages. Brian Lambblamb11@...

I believe I have fixed my account. Please resume sending me posts to this group. Thanks! Daniel Thompson

How much floor space does the rack consume? -Michael Wolf Tahoe City, CA

Includes: BN-35 Barth Multipress RP3001 3000mm c/w 3 Manual / Hydraulic Clamps and 90? Stop BM-35-10 Barth Hold Down Clamp BM-35-20 Barth Lateral Press with 2 manual R&P BM-35-42 Barth Casework

Perfect, glad it worked out! Brian Lambblamb11@...

Brian, My friend printed the thicker version as it matches my stop thickness. It turned out great, was about 4 hours of print time. -- Jason J. Holtz Furniture 3307 Snelling Ave. South Minneapolis, MN

Doug, Vertical at balance point or a distance "further" away from final position would be preferred, safest, if you don't have abundance of ceiling height. The extra angle on the load line will