开云体育

Thanks Imran, I actually think I have the 50 - Tenryu IW-30050CBD3 300mm not 60. When you say a sliding saw with less hook, do you mean negative? Or just low positive say 0-5°. I do have a scriber -

I had a 30 gal drum on cyclone with 18” woodmaster planer and have RL125 since 2018 with Dual51 equipped with a Tersa head. I filled cyclone filter once maybe twice in 15-16 yrs but have filled

Today I did the mistake of not looking at the dust collector fill indicator when I joint/plane a 18" glue up (I swapped a bag 2 days ago and did minimal milling since then) The entire cyclone and

Has anyone here ever experienced fence plate alignment issues on their f700 series shaper? I’ve had an F700z shaper in the shop since August 22’. It appears that the outboard fence tapers in to

Hi Bryce, I did not do anything, I am glad it is working again. I am impressed that you were able to join two sections of the tape, I would not have likely even given it a go. Imran Malik IAM Wood

Hi Brian, Yes the magnetic tape is definitely tricky to set up after having cut it. You are right about putting it down then cutting it being problematic. That was the problem i ran into the first

Thanks for the reply Imran, I checked the distance between the read head and the tape and it doesn't vary. What i did however just try, was zeroing the read head at 600mm and 800mm and then again at

Bryce, Maybe I'm not understanding what you have doen, but you have two? seperate pieces of magnetic banding? If that is so, you can not get accurate measurements as the "pole" distance on the tape

I guess I am trying to ask if the issue occurs at any place along the path or in one location? You can zero it anywhere and check if it provides incorrect displacement. Double check that the read head

Hi Imran, No the zero'd position seems to be exactly the same every time. It's either side of that point that it drifts out. I have tried using a Starret measure stix on the magnetic tape before and

Hello Netanel, I was wondering if you were able to get 25 people interested in this so that you could move forward? Thanks, Craig

Hi Bryce, Is the issue only at the zero location? Is it possible that the mag tape got damaged somehow at that location? The cover plate should not have any effect. Imran Malik IAM Wood

Hi all, Just thought i would give everyone using the M503 digital readouts a heads up on a potential issue. This may simply be a case of "you get what you pay for" & i'm ok with that sometimes. I

Everything the plaster is used was the aluminum profile and when I did work at my house with Plaster, I don’t use drywall. I use steel profiles. martin/campshure/co/llc mac campshure 7412 elmwood

I did the same "shadow" thing in my house with jambs and baseboards using Trimtex z bead [1]. It was not the easiest thing to find, but two drywall supply stores within forty minutes drive stocked it

Thank you very much guys, I really appreciate your help! Mariusz

John Can you post a picture of your shop with the tile floor? Thanks Dave Davies [email protected]> wrote: -- Dave & Marie Davies www.myfinishingtouch.com 318-219-7868

It's more than what you're looking for, but I use the 100 tooth Tenryu IW-300100AB3 blade for crosscutting.?? It is excellent for both plywood as well as hardwood.? The cut finish is just about

The Z-clips are not for mounting panels, more like picture/object hanging. They make mounting systems for ceiling and wall panels as well. Brian Lambblamb11@...