开云体育

Imran - I was told that shelf life on belt joints was either 2 or 5 years, more importantly to use the belts correctly and let them warm up and relieve their "set" from storage or lack of use before

I'm chiming in recommending Klingspor with the caveat that they are set up to handle commercial accounts, not the retail online store as they present at their US website. They have historically

David: I think I have 2 new?extra belts for my North State (Renzetti),?if you are interested… Klingspor; though it may cost more to get them to you than they’re worth. Probable replacement is

Wow, 3pack for $60 at Maverick. Last Nov I paid $50 to $55 each (60 grit being more) for 17x54 from Klingspore Woodworking Shop. I had some old belts fail at the joint. Does anyone know the shelf life

I totally agree you can’t compare the entry level A3 machine that costs 1/5 the cost of the SCM machine. But this is the only comparison I have.

I have a Powermatic 1632 WBS. ?I use belts from Mirka and I am very happy with the quality and life of the belts. ?Your local Mirka source is Barbo Machinery out on Airport Way east of PDX. ?When I

I respect your feedback but it's not exactly fair to compare a hobby machine like Felder's Hammer A3 to an industrial unit like SCMi's L’invincibile FS7. A closer comparison would probably be with

I use Industrial Abrasives in Reading, PA. I can drive there.

I’ve been getting mine from Maverick as well and have been satisfied. Over the last couple years I’ve noticed more online ordering options for sanding belts and I’ve used several taking

Nothing bigger than 4" x 4" in my experience. Jason Holtz J. Holtz Furniture www.jholtz.com 3307 Snelling Ave. South Minneapolis, MN 55406 612 432-2765

My widebelt sander tech told me to steer clear of these machines. Not the worst but he doesn't care for working on them. Jason Holtz J. Holtz Furniture www.jholtz.com 3307 Snelling Ave.

I don't have a wide belt but do use Uneeda for custom belts for my Kundig Uniq edge sander.? Before my first purchase the Uneeda sales rep (Tom Espisito) provided suggestions of paper types based on

I have been getting my 17x54 belts from 2sand. They have been quality. Recently found a better price at Maverick Abrasives. Their belts appear to be fine. Thanks for the inquiry so we can all benefit

It took a bit more than 6 months, But my L’invincibile FS7 is finally here. After speaking with Sam about delivery with both agreed it will be best if I’ll do a local pick up from SCM. I picked

I’m in need of some new sanding belts for my WB, and would appreciate current thinking on where to order best quality online for a custom belt lengths. Suggestions appreciated. David

What’s size has worked well for you? Tolve construction

I'd check if it is made in China as some Butferings were. I believe those had issues but I've no real knowledge of specifics. Dave ________________________________ Sent: Wednesday, February 12, 2025

My torsion box skins are typically 1/4" MDF. You have to be careful with your cell spacing as you can scallop it with too much space between ribs. Jason Holtz J. Holtz Furniture 3307 Snelling Ave.

Jared, that should work. I was thinking of a single top hat bushing because that’s how I run a Garniga square edge sticking cutter set I used on the Crafter. Because the groover is adjustable from

Are these WBSs still being made?? I found a 2014 on FB for $10K which seems like a good deal.? When I go look at it is there anything in particular I should look for to assess it's condition?? It