开云体育

If you go separate, the Felder line is also worth checking out. The D951 looks like a super nice machine. I know the Felder jointer doesn’t have the single post limitation.

Hi Jim, When I ordered my FS-52es, Sam Blasco said that SCM North America usually tries to keep one or two in stock, so if you need something in a hurry I think it would be worth a call to see what is

Lucky, There is one difference, It takes two button presses to engage the programmed features.? You press the program and then the blue lit button.? For some options it takes three - function,

Thanks again for the information. Do you think the newer Dual 51's have inproved over the older version in both set up time and the issues with the bed calibration? The one I am looking at is the

Thanks Tim, and thank you for watching! -- https://www.brycecomerwoodworks.com/ https://www.youtube.com/channel/UCHdrRaAZd_pOa7wwbdNPUEw

Thanks for watching Murray, Most of the cutters of this type i grind myself. It's what i love about the system, it's a lot like slotted collars being able to grind my own cutters to what ever i need.

Bryce, many thanks for sharing the video. I'm familiar with your videos from YouTube and wasn't aware you were a member of the FOG. I particularly like your use of the tilting arbor to form the 45°

Hi PK: Thanks so much for your video. It’s well done! I see the SCM electronics are very sophisticated. There’s a fair bit more programming ability in it, when compared to Digidrive. Maybe

I don’t have one for sale. This is Felder option for 20” Dual 51. My Felder tables have the height adjustment but the Jointer came predrilled, I can use the table from planer to the jointer w/o

Greetings, I want to add some F coupling rails to my 20 inch Davis and Wells bandsaw so I can use my felder table extensions on it. ?I thought I would check with the group To see if anyone had some

Jim, Unfortunately the FS7 is a machine that is built per order, so you’ll need to wait ~6 months to get one. FS-52 should be more available, but it is still a machine that runs out of stock

Any idea where I can get one, :)? Thank you for the information and feedback. Jim

Hi Tom, Thank you very much for your candid feedback. Availability seems to be the issue right now with these SCM machines. -Jim

Hey PK, Great videos, I definitely prefer the L7 but unfortunately it doesn't seem to be available anywhere in stock and it's for my business and i can't wait months for it. I have a couple SCM

Hi Jim, One nice feature of the SCM machines is that the dust chute remains on one side of the machine, so it simplifies ducting and makes transitioning from one function to the other easier. My

I don't have experience with the Dual51, but when I wanted to upgrade my Hammer A3-31 earlier this year I checked the spec of both the Dual51 and the SCM equivalent. I liked the advantage of the SCM:

…as they say, a picture is worth a thousand words! ?

Lucky, The L'invincible FS 7 has SCM's version of Digi-Drive.? It is the only J/P combo from SCM with it.? It is called Ready 3.? You do not need to lower the bed if it is 25mm or more. Here is my

Jacques, This is the issue with conversational threads. Tenoning hood was mentioned earlier and you are correct that it would be the safest option. Imran Malik IAM Wood Creations

Thanks for sharing, Bryce! Beautiful details and execution. Tim House [email protected]> wrote: