开云体育

The Martin T-27 has 2 sets of holes allowing the Aigner to be secured in a front or back position (125mm back). ?The touch screen allows you to select the position and the settings are adjusted

The formula oversimplifies reality, as horsepower is directed through impeller designs with different efficiencies.? And even for a given impeller design, the efficiency of pushing air is affected by

Hi Gurer, If the saw runs from the switch on the chassis then the cable connection must have been made. If it does not run at all then look for a cable under the slider and a mating one in the

Hello everyone, I have a K 740 s and my on/off buttons on the sliding table are not working. I had the machine's electrical panel checked by a good technician. He said everything seemed normal. I also

One member trimmed the front end of the micro adjust block so the fence moves further back. That or drilling and tapping a new set of holes. At least locating the holes should be easy as there are 2

Has anyone figured out a good solution to running the high speed router spindle with the Aigner integral fence given its larger fence thickness/depth? I assume I could always move back to the original

I have the same hood and added an aigner integral fence to it that I picked up in Europe. The fences use a threaded plate instead of that big nut- I replaced the Felder threaded stud kip handle with

Netanel, Sent you a PM - catalog and price list from Scott Slater.? less than 30 days old. PK

Netanel, Not sure if these would work for you but are available at Felder eshop Coupling system for table extension, F-coupling for Felder F 900, F 700, FD 21 professional and Format4 profil 45 Z

Any Martin dealer in the US can source Aigner products for you. I recommend you contact FOG founder Scott Slater. scott@... Or contact Martin: MARTIN Woodworking Machines safety-accessories

is there a us distributor that sell Aigner products? I forgot to order the Aigner bracket when I did the order from S&S and paying 80? for shipping is a bit expensive. In addition, I couldn’t find

These two links may or may not help you, but they do illustrate the mechanical system used to attach the Aigner Integral Fence to the shaper hood: https://flic.kr/s/aHsjPw5vLy

I have a 2004 Felder CF731S and I’m hearing from a Felder rep that there’s not a compatible Aigner Integral Fence that would work with my original shaper hood (pictured and linked below).

Definitely just contact Felder for the spare parts. At least here in Canada, i have found them to be very reasonably priced. Definitely cheaper than having something machined up as a one off. Felder's

I have a 10-inch (254mm) Forrest Dado King drilled to fit a KF700 saw arbor (or 30mm shaper spindle) that I’m willing to sell. It was used only once to cut tenons in 10 Douglas Fir fence rails, and

I have a BF 6-41 (single phase) that I purchased used some 25 years ago. It has the scoring arbor that appears to function. It turns when the machine is on, but I've never used it as it is missing the

Kamal, I have the 8” size Forrest’s dado set. Thx, Wade

Brian, My understanding is that you were sent tooling designer for the shaper (spindle), while you were looking for something that could be used on both saw and shaper. An example of what you may be

Hi Brian, I wood call Felder, speak with a manager, ask for a return shipping label and ask for a refund or exchange. I don’t know why they would have southway does not fit the machine. BTW, I have

I also bought a cutter that had pin holes but wouldn’t mount on the pin pattern on the saw arbor. It is part number 4.1.173 and I have other sizes and they don’t fit. What is this cutter meant