开云体育

These are 100% done with a 3D cut path on the CNC. Even the tiniest amount of sanding would be evident or erase details. I soak with Rubio Monocoat, then with an air nozzle in one hand to remove

Thanks for the info Bryce. ?I eventually found the manual taped to the top of the extractor and it detailed the seal placement as you described. For future reference: The sock filter part number is:

Ok, i just remembered to check for a part number for the wiping brushes, and came up empty handed i'm afraid. I would contact your local Felder rep, i'm sure they will be able to sort them out for

Fun removing the wax finish to do conversion varnish basically after sand it all often make sure every bit of the wax is gone otherwise it doesn’t work And yes, as far as I’m concerned, conversion

Hi Andrew, I'm definitely no authority on this subject, but having just pulled the filters out of my RL200 to manually clean them, i can tell you that the seals on it are level with the inside edge

Hi John, I use it all the time and with a bit of care, it will give perfect results. I'm helping Whitehill out in North America so feel free to reach out with any questions you may have.? I suggest

Thank you Henrik,Daniel & Michael! I will definitely include hard wax oil and tung oil in my tests. Mariusz

I bought mine for large tenon work and I can’t fault it. Set the fence up as a bump stop and the tenon shoulders work out perfect. Kindest Regards Jonathan Samways www.fineinteriorwoodwork.com

I really like mine. 4” may require something done with guards. Mark Foster

Thank you Andy

I have. And they work as advertised. I find they are fit ready off the shaper and only occasionally need to refine them with a hand plane. I thought at first the head being on top of the spindle would

Has anyone here used the Whitehill Hammer / felder flush mount combi heads for long tenons? ?I have a felder F700z . ?I build reproduction furniture so i was thinking this head could be used to

Why Mac, it's obvious. The first step in treating a mental health issue or addiction is to recognize it as as a problem. :-) Regards, Rod.

Has anyone used a 2K additive available for a couple of hardwax oil options, namely Saicos and Whittle Waxes? There may be others. I have the Whittle Waxes version to add to the Evolution Hardwax Oil

Nice summary Henrik! Chris Rozycki

Here is a Sapele sideboard finished in Waterlox. I have also used waterlox on a bathroom vanity top and it is holding up well after 4 years. Michael

Hi Colum, I don't have direct experience with wood flooring over an electric heated floor. Regarding Rubio, I applied Rubio "Pure" on my rift- and quarter- sawn Red Oak flooring roughly five years ago

Since it's no competition to give the advice you then choose (or is there some secret reward?), you're probably right to read and take all advice with a certain amount of skepticism. But one thing I

This is sapele with shellac and then a light wax. I’m partial to shellac because, although not the toughest, it will reflow with a fresh application so it’s super easy to repair/recoat- no

Mariusz 'opinion is the same as mine. I would never mix solid boards with underfloor heating, almost 100% guarantee it will move like crazy. Engineered floors are ideal for your situation. An