开云体育

Laurie - As other posts here have mentioned, Google translate or a decent German-English dictionary is a good part of the Felder/Hammer tool kit. Good luck with this, Imran is pretty savvy about the

This is the schematic in the user manual. [email protected]> wrote:

On this page there is the original document in German: https://www.bghm.de/fileadmin/user_upload/Seminare/Holzbranche/TSM-Web_BG_96.18.pdf

Laurie, Thanks for confirming. This is an interesting anomaly. German is fine but need schematic to offer any assistance. Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

When the stop button is pressed, the speed slows slightly but then returns to the normal operating speed for 5 to 10 seconds and then the motor reduces speed and stops. If I press and hold the red

Hi Imran, Thanks for the reply. I did reach out to Kyle at Shop Gear to see if perhaps they had an alternative base for the smart stand. I didn't see anything on the website, but one never knows. I

Hi Alex, I was on quest of figuring this out but no one here, that I recall has confirmed. I thought Kyle (Shopgear) mentioned that someone did. Have you asked him? Locking levers are large so easy to

I got tired of fighting the Felder F48 power feeder. ?Very heavy and awkward to switch from horizontal to vertical feeding. ?So I purchased a Comatic DC70 with the smart stand. ?In error, I assumed

Thank you David, I just uploaded the full translated document, I haven't had a chance to review, but looks like good info on shapers, sliding table saws, band saws, etc... -- Tom Gensmer Heritage Home

Thank you!!!

I did something rash, and ordered a new Format-4 Kappa 450X. It is currently on a ship near Guatemala, headed for Oakland, CA. It should be in Boise by the end of November. Now I need to sell my K700S

I don't think I have ever heard mention of someone getting that option on a Felder, so finding out how it works is going to be up to direct questions from Felder, and that's if they know.... Brian

Thanks Brian, I'll take a look.? One of my questions was whether or not the spray attachment is designed for MQL, or whether it makes a real mess.? I see that SCM's equivalent option is described as

Can you confirm that it increases in speed or just does not continue to slow down. Thought being, that the brake is kicking out after a short time. If it is indeed increasing in speed then I need to

Realizing that I could build up complex profiles from multiple pieces was the key thought that really opened up possibilities for me.? Depending on the complexity, I've sometimes build fixtures to

I have cut a lot of aluminum on the slider. Unless you want to do it a lot, I wouldn't bother with the lubrication option. I use a Castrol Stick Lube I think they call it, use it on the chop saw,

Recently my CF531 has exhibited a delay in stopping.? When I press the stop button, the machine begins to slow down but then increases in speed and I have to wait 5 to 10 seconds before the machine

Thanks Jonathan, Bryce and Patrick. Yes, the thought was to do it in 2 pieces. Dado the profiles stock and the glue it to a backer. The shadow line is the tough part. I can roll the molding on top of

Does anyone have experience with a slider that has the optional spraying unit for cutting light metals?? I'm planning to buy a slider at the end of this year, and am trying to decide if I should get

I bought a narrow one from Crown. After looking at online options, prices and shipping I found an add for Crown. A quick call to the number got me a call back from my local rep. He was able top get me