开云体育

David, Thank you. My friend is in NC and he has the parts. I know there are places to get 3D prints done but I was wondering if there are places where they will model and print. I would be happy to

Mark, Yes, Bend has been great! I even did the High Cascades 100 mtb race this year. Joe

Subject is well documented but my first experience. I did not even know there was a spiral hose between the plastic basket and the external port. One would never know that it is compromised. Totally

I have to admit she did not do that for me. She was just tired of her long-haired dog tracking sawdust and shavings into the house. -- John Hinman Boise ID K700S and A941

Hi John, You win, that ain’t happening at least while I am alive. Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

??? nice John! Wade

Probably the least expected thing in my shop was my wife sweeping the floor! -- John Hinman Boise ID K700S and A941

I thought you had a Ph.D in Rhino CAD. Send me a dimensioned sketch or annotate the photos with dimensions and I will model it for you in Fusion and send you a STEP or STL file. You can get it printed

Are you still in Bend? Mark Foster

Hello All, Can anyone point me in the right direction to have a few small parts modeled and printed? The parts are from cabinet hardware that was ?overloaded and failed. Thanks for any advice! Joe

I once found a puddle of brownish oozy goo below one of our two Reznor heaters. The unit would not operate either. The culprit ended up being an unfortunate squirrel who must have been looking for

Well cuteness is wearing off Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

Thanks David and Imarn

Not as exiting as a rabbit, but I found a black widow. I start operating a machine, just to find out I have a black spider crawling on my hand. Luckily the machine wasn't running (and I wasn't

?I will start by this pic, taken moments ago: Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

I have the narrow rip capacity machine, 32" or so. I've had my machine up against walls a time or two and always left 49" or so from the blade to any unmovable obstruction on the right so I could

Using an adapter that stays on the BowmouldMaster. David Best DBestWorkshop@... https://www.flickr.com/photos/davidpbest/collections/ https://www.youtube.com/@David_Best

David, how do you connect Bowmaster to the Profil shaper (where has a dust port fence of 140mm)? Do you have a reducer from 140mm to 120mm or do you use a dedicated hose?

Hi David, Thanks for the reference. It never fails, I looked through the index (obviously not carefully enough) and the section 7 in survival guide before asking the question. Completely missed the

120mm. See attached. The Aigner catalog is in the files section. ? David Best DBestWorkshop@... https://www.flickr.com/photos/davidpbest/collections/ https://www.youtube.com/@David_Best