开云体育

The detailed drawings are not well organized or presented, and is missing some information . I recently was checking that I could actually get my new Kappa 450X into my shop, and had to contact Felder

Have you considered sending this to the Felder “wish list” portal?

Kerry, Brett These ideas will work for lay out ideas. While a proper 3d model would make it over the top for space and work flow guess it is not really needed. Maybe someday Felder will release models

I couldn't spend too much time on properly appealing modelling and geometries in Fusion, so I used some generic simple extrusion geometries to the nearest couple inches tolerance, but made sure my

Same answer. David Best - via mobile phone

If it is the same motor as my Hammer J/P, it should be 4HP and 3KW. A 20A breaker should be sufficient (Felder told me I can use either 20 or 30A breaker)

Yes, it is single phase. I don't know the size of the motor. I assume (perhaps erroneously) that the 531s all came with the same size motor. (Unfortunately, the unit itself is in storage and I won't

Hi David, I was suggesting +0/-0.001” (1 mil) not +/-1.0 mm. Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

You guys are kidding yourself. +/-1.0 mm would be more sloppy than the original Felder unit. The required spec is +/- 0.01mm or better. What I produced was +/-0.0003-inches or +/- 0.008mm otherwise I

Hi Nate, David be the best to tell us if it is worthwhile to relax the 1/2 mil spec (between the bushing and the counterbore in t-nut), which is hard to meet. I would be worthwhile to know the effect

Are we familiar with any metal show that is willing to produce something with a tolerance of 0.01mm?

Hi Chris, Well I shared this on my FB page and there is interest for 16 pieces. Probably not enough but anyone willing to take up this project? Imran Malik

What size motor does it have? From your details, I assume it is single phase. Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

A first post with a simple question: How large an electrical circuit is required for this machine? I should soon take possession and want to know if I need to add another circuit in my shop. My

David: I have been on the same journey and looked everywhere for models. Finally, I got the dimensional drawings of most of the equipment I have, along with the equipment I will order. Then I drew the

Thank you. now just have to figure out how to import them to sketch-up

Felder can provide you with dimensioned drawings of all their machines in PDF format. They will not release the 3D models, but I can confirm that they were created in Siemens NX which wouldn’t help

Been building my man cave for a while now. Like to think i'm in the home stretch of building anyways. Still have plumbing and flooring to pour. Yes, pex will be laid out for hydronic heating. Once in

Here is my order from this year and see the DNSP note (circled). I have never had to contest it but if they do not follow the quote, I will definitely ask for a refund. Imran Malik

Aaron, I have always said NO to the air shipment charge from Europe and opted for the 4-6 week delay. Which means that the parts come on the scheduled monthly shipment. I also make sure that the quote