开云体育

P.S. WD40 is also somewhat solvent borne, it will work great immediately, as soon as it dries up a bit you will have a sticky mess with lots of residue. Brian Lambblamb11@...

Dry lubes are generally a solvent that carries a high pressure additive. You coat the items, the solvent evaporates and leaves behind a high pressure "coating" and then that does the rubbing against

Both Slick 50 and WD40 are penetrating oil lubricants.? The LPS 1 is considered a "dry lubricant" / water displacement element.? I think the LPS 1 would be good to treat surfaces that are exposed,

I will definitely look into lubricanting those areas tonight, thanks for the suggestion.

Or lps 1 or slick 50 martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330

Just e-mail Felder with S/N off the machine label ( techsupport-us@... ) and they will provide a soft copy downlink. This ensures you get a manual specific to your model yr. This will

You can buy the manual from Scott & Sargent: https://www.scosarg.com/copy-of-manual-for-felder-kappa-40-panel-saw?srsltid=AfmBOooVIi-GNTdVpNpSZ4fNqPZY8jiv1-m_KBPjhIjRaRh3g9-sHVt7

You need to lubricate the jack rod anywhere it rotates inside another piece with something like oil or WD40.? My stock FAT300S performed very poorly until I did this (it would be difficult to pump

I have to south worths One 4x 6 x 7” to 36” at least 4000# on wheels with 3 wheel lift One 5x8 x 15” to 84” 6000# Both push afoot medal martin/campshure/co/llc mac campshure 7412 elmwood

Southworth? Dave Davies [email protected]> wrote: -- Dave & Marie Davies www.myfinishingtouch.com 318-219-7868

Hi JP, I have a Felder FAT 500S. When loaded with a few hundred pounds of material, it does take some effort to lift. -- Tom Gensmer Heritage Home Renewals, LLC Minneapolis, MN

Hello all, New to the group and the Felder/ Format brands. I am picking up a new to me 2006 Kappa 40 with the motorized height and tild adjustments this weekend and am looking to get more information

Does anyone own both of these? I have the 300S and with a load it takes a fair amount of pressure on the foot pedal to raise the table. With almost twice the weight capacity and dual hydraulic

Robert, I am not geographically located where you are as I am in Michigan. But When I bought my BF631 in 2012, I got a trailer and drove 7+ hours to Milwaukee Wisconsin to get it. Not a big deal. If

Sold.

Jack Forsberg on Instagram: "for accurate tenon work it should all be registered from the same side, either the backside or the face side. this procedure remove any miss thickness pieces and

David, the idea has merit but I'm not sure I want to invest the time and energy in locating one and then rebuilding it, not something I've got experience with. But I like the idea enough that I'll

The Quincy QR series are the top line and known for their robust construction and valve design. I rebuilt a couple of used ones which was pretty simple and my 325 used puts out about 15 cfm and runs

I didn’t even know there were conical blades! ? There is no visible table top adjustment like on our Felders. ?He will have to take it apart and explore things obviously but I was thinking you

Rusty I use tapered scoring and raise till it meets the width of the kerf. Mac,, martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330