开云体育

Thanks. I've ordered this one as well. https://www.amazon.com/dp/B00F54LUPA?psc=1&ref=ppx_yo2ov_dt_b_product_details Seems perhaps Felder's part is underspecified in the manual and may have been

I am preparing for doing some shaping of a kitchen cabinet door project using the shaper in my KF700. I just got my F38 power feeder up and running and plan to use it. I like the idea of using a back

Here, you can get three of them for $12.29 and have them by Wednesday. uxcell 260J6 Rubber Poly V Belts, 6 Ribs PJ V-Ribbed Belt 26" Length x 0.55" Width x 0.14" Thick, Industrial Transmission Drive

I don't know about Felder's internal part number, but you buy those belts by the size, PJ660 and the number of ribs. I'm guessing someone at Felder bought a batch of 7 rib belts by accident and they

Thanks Brian. Any thoughts as to why Felder would think this is the correct belt? The PN on the bag matches the PN in my parts list as well as the Felder shop. The belt type seems to match as well,

No... can't do that as one pulley has extra hanging off the backside and the other off the front side. And looking closer the idler pulley looks like it would be too wide either way. Brian

That would be the problem. Those type of belts are pretty common, if you don't want to wait for Felder, you can probably find one local, or Amazon. Brian Lambblamb11@...

Mystery solved? I think I have the wrong belt from Felder. I checked planarity as best I could (can't say it was a great check, but nothing seriously out of wack) and remounted the belt again. I

Hi Jason, what I do most of is rip up cants that are basically 4 x 4 and the feeder works beautifully for that. I think the wheels are probably 3 1/2 inches tall works quite well. If I do any

Nice setup Mac. Looks like it would be great for ripping. Maybe not so good for resawing? How tall is that wheel, like 3"? Our belt type feeder is only 6" high and it struggles a bit when resawing

Pictures help martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com instagram.com/maccampshure/ Designing and

Here you go: Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share Sent: Sunday, July 07, 2024 12:35 AM To: [email protected] Subject: Re: [FOG] Clamps and accessories

Greetings; Bock thought I would share a few things. I have a rapid 640 which is a ACM I believe and I mounted comic basic feeder. I find it annoying that I could only rip fairly narrow stuff maybe 5

/g/felderownersgroup/files/Jigs/T-Slot%20Nuts/T-Slot%20Blocks.pdf?

I sliced 12 veneers at slightly over 1/16" from 5/4 bubinga last week with a 1/2" Wood slicer. The cut is probably good enough to glue down. I know carbide is good, but for the thicker kerf and 3x

Hi Rich and welcome to the forum. I had a 17” Grizzly and a 24”. Then I sold those two and bought a FB510, used it a few days and returned it, then bought a Grizzly 21” with the electric brake.

Hi everyone, New member here. I've been operating woodworking equipment for about 60 years (and boy am I getting tired - ba dum bum! ?) I've had a Grizzly 17" 2hp bandsaw for the last 10 years. I

Warranties are a complex subject and the law varies from state to state. Nevertheless, they exist to protect consumers, especially implied warranties. In my experience, Felder has some ridiculous

The broken casting for the fence base happened to a few I know as well. In my case, the fit of the base was a little sloppy, which made the fence "swing" into position. The work-around was to push

Continued today. Free shipping on most everything — I bought a spare filter for my RL125.