开云体育

For people who have Felder’s DRO on the extension of the xcut fence. Do you find it useful?

Did this ever happen? Still interested if available. [email protected]> wrote:

Mac, can I pick that up when I get your saw? Dave ________________________________ Sent: Wednesday, February 7, 2024 11:24 AM To: [email protected] <[email protected]> Subject: Re:

Hi Mac: I absolutely love it when you share pictures of your shop, and your machines. They really don’t make them like they used to. Not only do I enjoy the nostalgia of looking at commercial

Detail station:Here are a few picks of a small 4” belt sander I re built and modified an old PORTER-CABLE /Engelberg for detail work in my lab. Modifications : Table over direct drive motor . XY

My Dual 51 has a separate motor for feed as it has variable speed feed option. Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

Hey JP, I too have a 1 year old Dual 51. As the other have said it’s a machine that basically has to be turned off, moved and turned on again to continue working. Lately, I’ve been doing a lot of

Is the feed using power from the main motor if so disconnected feed lever first . martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell

JP, The tech has a point but likely did not communicate it well. Motors have service/duty ratings from S1 to S10. My Dual 51 is 7.35 KW S6-40%. Here is the explanation. S1 Continuous duty The motor

If you’re talking about a fuse being blown at your load center or breaker panel, then you properly have not sized the breaker/fuse to the load of your Dual 51 at start up, or the wiring is

Hi JP: Definitely not normal. The advice to keep it off for 10 minutes to avoid damaging the circuit board is bull/#$t, for sure. The reason why we both know you’ve been told incorrect information

Hi Guys, I have a question about our Dual 51. It’s nearly brand new, probably used less than 15 times, as we rarely mill lumber and when we do, it’s often not a lot. We’ve been using it with our

James, Funny you mention that. When I built the last few Big Squeeze few yrs back, I decided to get the oscillating sander and Rigid was my choice because it did both for a reasonable price. I tried 2

Imran, I followed the technique Michael Fortune described in the attached Fine Woodworking article, it does work. Now, I can bandsaw the template (straight or curved) very close to the line. I use

Here is a picture:

Patrick, I second Joe's opinion. I think a beam clamp is unnecessary unless you're doing a lot of veneer or thin pieces. A piece of MDF on edge or slightly curved caul as Mac mentioned works well. The

Hi Pierre, your wiring would be correct for Canada. Regards, Rod

James, Brave is not the term I would use. -- John Hinman Boise ID K700S and A941

Agreed, the lack of safety glasses on a sliding table saw isn't a big thing.? Now if you're grinding metal, definitely! However, in the 3rd video of this series, he does a rather dangerous action

Hi James, That is crazy! Last I heard, no one making replacement eyeballs (yet). ??? Thx, Wade