开云体育

I’ve used them once. Bought a Lamello right after. I much prefer the Lamello.

Sounds like you just need to own a CNC machine to use LockDowel. Unfortunately I don’t have one of them lying around! ??? Wade

Thanks for all the responses. Joe, i almost added to my original message that, "the only other time ive seen the clamp was on an auction for a T78, the goofy slider that didnt bevel". I will search

I’m hoping someone in the group has tried the product LockDowel or knows someone who has. ( https://lockdowel.com/ ) I am planning on building new kitchen cabinets and considering this product for

Imran, I haven't yet installed the 110V outlet in the middle of my shop under the CF741 as I never found a usage for it. I did put a dozen such outlets on the walls around the shop for easy access. I

New purchase k540s. the blade height mechanism is not working. It was loose from the factory and now it merely spins. Spoke with Felder and tried their recommendation but that did not work. Tried to

The Ironwood part number is: 61-300-32323 $4,000 Dave Davies [email protected]> wrote:

Response from Ridge Carbide on drilling pins holes in the CMT Dado Pro Set: Normally, we don’t have any issue modifying other manufacturer’s blades. But this set already has a “bunch” of holes

Looks like it would be about $275US for the set shipped to USA. Sure would be nice to have a metric set of dados and shims to fit a Felder. I’m awaiting a response from Ridge Carbide to see if they

Pierre, Your connections look good to me. If you do not have a 110 outlet near by that is not a bad idea. Before running air thru the shop I used a baby air compressor for clamps. Extra outlets never

Thank you all for the precious info. I will simply install another electrical box using the same circuit as my machine on the floor to plug in the feeder. Now I need to figure out which wire goes

For overhead dust collection boom arms or any boom arm where you want the most flexibility of positioning, that means an articulating boom arm. ?For articulating boom arms used for dust collection,

I was planning to buy a K700 with just a few options when I was alerted by Imran on this group to a used machine in Texas. I had to make a fast decision, which was hard on such a large purchase, but I

Thanks!

Larry, if you are planning on doing a shop build of something similar to the medical light in Brians ?post, try going onto YouTube and searching for "overhead dust collection boom arm". these involve

Hi Michael, Per your private msg, please see the installation pics. BTW, I picked up the power after the master switch. There are provisions in my KF700 electrical cabinet that allow the wiring to go

I managed to clean it eventually - compressed air helped a lot - in case it's useful to someone else, with the saw lowered remove the saw blade and clean as much as you can using tissues and a long

Thanks for the excellent points, Brian. I am probably in the 9' x 10', 10' x 10' range but it depends on where I end up putting it. I have a space inside of my existing building that would be ideal

When considering shipping it getting expensive. Ridge sell dado set and for $409 (you can usually find coupons of 15% that lowers it to ~$350).

Thanks John. I completely represent the comment "whatever size you choose you will fill it up." Regardless of the size house, garage, or shop my wife and I have ever owned, we have filled it up. We