开云体育

I just pulled the trigger, machine is expected to be manufactured in March and hopefully in the US by end of may I am getting the following configuration: 3 x 230V 7.5HP (5.5kW) motor for main blade

Hi Alex, Thanks for the details. I hope the cap replacement fixes your issue. Hopefully you have replacement for both of them. If not look for one with a popped end. If no visual evidence, I would

Thanks Imran, it’s difficult to describe the symptoms as initially there was a grunting straining sound that seemed like a braking hum and it tripped the rcd. I turned it on again, the saw started,

Alex, Sure, from your original post, I thought you were having braking issue, i.e. RCD trip at turn off during braking. But if the motors don’t run then replacing caps should help. Once motors are

Hi Imran, I have another couple of diagrams which maybe could help. I didn’t send them as didn’t want to complicate. The machine was manufactured in 1999. The motors do not run, just lots of hum

Interesting - thanks Rod! I have a use (2012) KS700S. I’m considering adding the Felder guard (expensive long lead time but seems substantial), the Harvey shark S-12S guard, or perhaps this is third

Hi Alex, Correct, this schematic is for 2KW but for one w/o brake function. If the motors are starting up and running normally then capacitors are good. My schematic has a date (bottom left)

? Hi Imran, I’ve managed to find the big book, but it’s only a spare parts book. However a capacitor replacement a while back (just one replaced) instigated a request for the wiring diagram from

I added an overarm guard to my B3, which would be the same as your K3. I still use the stock guard when I use the power feeder. Regards, Rod.

Hello Bird, it doesn't matter whether the cutter is Metric or Imperial as you adjust the width of the cutter by adding shims to your desired dimension. I use metric in the shop both for designing and

Oops! I see the photos didn't come through, I'll try re-posting the photos here: Wide shot of machine: Wide shot with Aigner guard in place: Wide shot with power feeder in place: Wide shot with

Not just you, Jonathan. They did not come thru in email or on the web. Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

Is it just me or did your images not come through with the message? Kind regards, Jonathan

Hi Murray: “Lucky, have you considered doing a Wood Review article? Also, what plywood supplier did you use? I’ve been struggling with good quality plywood ever since Sharp Plywood went belly

This has been a really interesting post, ?have a similar project coming up so thanks to all who have contributed so far. Lucky, have you considered doing a Wood Review article? Also, what plywood

Andy, You are absolutely correct that one of the major deficiencies of Fusion for routine cabinet work is a lack of fenestration hardware libraries. Jeez, they have just recently issue a library of

Looking good Imran! Warm regards, Lucky From: [email protected] <[email protected]> on behalf of imranindiana <imranindiana@...> Date: Tuesday, 30 January 2024 at 03:22 To:

David - you are a wealth of information, thank you for sharing. I’ve recently decided to add a cnc machine to the shop. I have a passing knowledge of fusion in that I can make a parametric model and

Greetings Group, Due to a Shop re-organization, I find myself in the position of needing to sell my gently used Profil 45 Z to accommodate the new layout. Please find the relevant information below:

Jonathan, Yes, there are two: Esperanto <https://en.wikipedia.org/wiki/Esperanto> and Pig Latin <https://www.wikihow.com/Speak-Pig-Latin> I think you need to try this