开云体育

?I’ve seen that also but my comment was specific to the K975 that Imran has. David Best - via mobile phone David Best - via mobile phone On Jan 18, 2024, at 8:07?AM, Aaron Inami

Hello, I just ordered a FB700Z. Its first job will be to replicate some 2-1/2" wide casing for a customer's 1920's vintage house. The moulding will require shaping on both the face and one edge. I

Imran, My experience was the same as Dan’s - no issue hitting target height first try. David Best - via mobile phone

Attached is a direct screenshot from Felder's website on the KF700 saw-shaper.? I know I have seen "K1 Powerdrive" in other places as well: -Aaron

Dan, “I have no problem setting my height on the first try before starting the saw for the cut.” You can do this on a Felder saw with just the 2 speed control knob for elevation? If so, can you

Netanel, Although there are pros to 3-phase power, there are cons too.? You will find it almost universal in commercial shops but rarely in home shops as it adds the significant cost of the

It is rather quite possible. As I said, you need to develop a feel for it. A stopped plunge cut is something that 90% of users never do. And those that do, it’s maybe a 5% occurrence. I have no

David, I found a few minutes to add more. I have the 2speed sw you describe but no DRO. I have added the DRO now. Were you able to crawl slow enough to stop the saw blade let’s say at 0.500 inch,

I sent you a DM, addressing some of your questions. Let me know if you did not receive it. I will make the assumption that you would be purchasing a case 700 S with the 5.5 hp base model, three phase

David, I do not know either but responded to Aaron using the term he used. “Hi Aaron, I have what you call K1 power drive on my K975 and hate it.” Imran

Imran, I am not clear on what you mean by “K1 powerdrive”. When I purchased my K975, there were two motorized arbor-positioning options: PowerDrive and DigiDrive. You are the first person I’ve

Netanel, I shared startup and idle currents of Felder 3Ph motors up to 10HP (7.35KW) in this document. This info is on FOG as well but I could not find it. Felder 3 Phase Motor Currents PDF Document

Dan, “I have not experienced the same frustrations that Imran has with his saw, just need to develop a feel for the switches that control the height..” Not sure what you are saying. I agree, with

Do you have any recommandation for phase convertor? What size do I need to operate 3-phase saw? I have a limited power in the shop. For the DRO, sorry, I meant cross cut fence DRO. I stopped working

Aaron - The overhead blade gard is on my list. It is currently?out of stock and should arrive in 12 weeks. It is anyway an addon item. Fritz and Franz - I have David Bad and I'll keep using in on

I see there is a huge price jump between the 7.5HP phase convertor to the 10HP phase convertor. $1400 to $3500 If I am going with the 7.5HP saw, will it be sufficient? I am trying to calculate how

Motorised/ powerdrive this that or the other are great to have when they are working........100% certainty they will develop issues at some stage, this timing will generally be a inconvenience. --

I have k2 power drive on my saw (long story on how I acquired a slider with k2 power drive controls and it didn’t cost me a dime extra) and can’t imagine having to crank a handle around all the

Imran - good to know.? Maybe the K2 power drive is the only way to go if you are looking at motorized lift/angle. PK - I wish I had your deep pockets! -Aaron

Netanel, I have to agree with David fully.? And possibly with Aaron too,? I may stand to be corrected, but I think when you order the DRO option from Felder on the 900 and 700 machines you get the