开云体育

Dave, When I decided to immerse myself into some metal fabrication work, I checked out the Siegmund mobile tables for welding assist. They are great, but because of space constraints, I decided to

Wade, the “ledge” that supports material when the top is flipped down into vertical position is about 10-inches tall It’s a U-shaped tube with one center brace, so you can slide materials

That indicator stand does not have arms long enough to reach across the sliding table. The attached document discusses a similar type with sufficient reach, or a method of making your own for table

I like those. I've been looking at welding tables, not so much for welding as working on my old heavy machines with heavy parts. Height is always a problem as my old back needs tables that adjust.

David, My apologies for not responding and thanking everyone sooner for their input concerning dial indicators and Nova Drill Press. I am going with your suggestion on dial indicator and if I need an

For anyone that does metalworking in addition to wood the siegmund mobile tables are a great option. In the same ballpark pricewise as the felder and quite versatile. [image: image.png]

Wade D - No argument there, back, wallet, & brain have been in serious discussions. ;-) Just got a Llambrich keyless chuck for the drill press, next large-ish purchase may well be the panel cart. I

Wade, It’s magic, cut the 3 tubes insert a pin / smaller pipe know you can take of or flip ledge over . Requires a 1/32 cut off wheel and a drill . martin/campshure/co/llc mac campshure 7412 elmwood

Mike, Per the questions answered by vendor, arms are about 4” long, so ~8” reach. Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

For panels I use the Festool STM 1800. It knocks down easily for storage. You can tilt it down to stack panels. It is height adjustable, albeit manually. I also use it as a mobile workbench by putting

Interesting. I looked at the Felder Survival Guide and it suggested unplugging the machine for a couple of minutes. Voilla! Back in action… Who knows what that corrected or why it worked… Mike

Will this base be long enough to reach across a slider and measure its tilt? I can't find dimensions on Amazon.

I have found Zoro to be a quick and affordable place to purchase my bases and indicators. They love to send out 20% off coupons and my credit card also frequently stacks a discount on top of that if I

David Best, No more Felder “machine Kool-Aid”, but am considering trying their “equipment Kool-Aid” ? I will say though, after seeing your link to the Shopcarts 4’ panel handler, that’s

Wade, I have the FAT 300 and am completely satisfied with it. Not sure how I got along without it before. Buy once cry once. I did also add this one to my shop, which has been useful as well and much

I did not buy the top – I got a 1” piece of Baltic birch and cut it. Sent: Wednesday, July 12, 2023 12:01 AM To: [email protected] Subject: Re: [FOG] Rangate 300 Lift Cart Micheal

Since the tilting panel cart was mentioned as this is becoming a carts thread also, I want to mention the Crazy Horse dolly for those not familiar with it.

Wade, me thinks you have slurped too much Felder brand Kool-Aid. Great castors are cheap and easy to put on. Last time I looked Barth wanted something like $1K for a laminated top with holes. That too

Micheal Marsico, Thank you. What did you do for a top on yours? Thx, Wade

Much appreciated David... Ed Cohen E. Cohen Designs