开云体育

O ya that machine will jump to the front of the line . lOL To bad u didn’t get to see shipping warehouse ,,,, ya all in dark maybe that’s y mac,,, martin/campshure/co/LlC he mac campshure 7412

I saw one of the Kappa 590s turned on and functioning in the showroom. As for the ability to choose colors: this is what Pinosh told me while we were touring the powder-coating area of the factory.

John Huelsenbevk, Thank you for the Felder factory in-site. Two things; Can the show room run the machines? And we could have picked our colors?! Damn sales person never told me that was an option!

Sounds amazing thanks for posting this, if only I would have known I could get my saw in victory pink! Tolve construction

I just returned from a trip to Munich, Germany, where I was visiting my daughter and working with a colleague. As you might know, Hall in Tirol is only about a two hour drive south of Munich. I had a

In addition to the great advice received, I'd buy a point set with the indicator. They are not very expensive and come with 10-12 different tips. Most indicators use the same threads so the tips seem

? More details here on the specific models and arm lengths: https://flic.kr/s/aHBqjzxbBU David Best DBestWorkshop@... https://www.flickr.com/photos/davidpbest/collections/

By the way, many dial indicators come with only a small ball tip. A broad flat tip is essential if you want to measure to a point, like a saw tooth. If an indicator comes with a wide flat tip as an

I have three dial indicators - two Wen and a Teclock. The Wen’s were very inexpensive; the price of the Teclock is lost in time. All three are serviceable and give repeatable results. For setting up

I like the Oneway multi-gauge. It’s not the best suited for the drill press; but it works and is much better for other machines like jointers , fences ect…. About a hundred bucks Multi-Gauge

Fred, you will find my preferred dial indicator and magnetic base recommendations in the attached. But the following would suffice for your intended purpose provided it has the necessary arm length to

I would like to acquire a dial indicator and base to check the run of my drill press and would like the groups’s input on which one to buy. ?Obviously I can go top shelf and it looks like one could

Many thanks Brian - I think I have a good idea now. ?Regards, Richard.

Mike, I might take you up on that! This one has been setting in the shop for over 9 months now. Contractor has been too busy to install it and customer in no hurry. Worried something might happen to

See attached copies of the parts list for the shaper hood. Hopefully that tells you what you need to know. Brian Lamb blamb11@... www.lambtoolworks.com ? ?

James, In my experience spring or flat has been mostly effected by outfeed table height. Setting the outfeed to be .001” below the cutting edges is a trivial adjustment. I have said this time and

I need t block should be on the shelf. martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com

Oups!?

I am attempting to retrofit an older model F700 shaper fence to my Profil45 shaper so that I can push the fence far back enough to use router bits with the high speed spindle. The current Profil45

Jacques…… Ummm…it’s Saturday where I’m at. ??? Wade ???