开云体育

To simplify my search can we say out of hand that there is a leader in the combination machine offerings between Felder and SCM? Looking at my shop I believe I would at minimum choose a saw/molder. I

I have a tilting spindle moulder, a SCM TI145EP, I use the tilting feature, maybe 5% of the time?

David and Scott, I am not sure that the infeed roller is replaceable on my FS7.? The segmented infeed rollers I have will leave a mark if you take a very small pass on softer woods, but I would not

One more benefit is that the dust extraction port stays on the right and you do not have to lower the planer table to do the changeover. PK, so when you are using the planer set at around 3/4 inch,

Thanks for chiming in here Scott. I agree with you that the Martin T45 and T54 are clearly the best available jointer planer pair - if you have the floor space and the budget. The pair will certainly

Larry, I ordered through Wurth.? They have the local business. PK

Hi there. There’s someone on this forum (check the posts under the #forsale tag) selling Felder saw-shaper and J/P machines. The seller is in CT. He has also cross-listed on Felder’s used machines

As many may know I am the Martin dealer for Southern CA. I had sold the Griggio machine to a couple of customers, and they were very happy with it. The machine was a 100% Griggio that was painted in

sure, just email me on timbershelf@... or face book search Albert Lee in Auckland

Out of curiosity, do you guys order your stuff directly from SCMI (presumably through a sales rep like with Felder USA), or from one of the many retail distribution websites I've seen their stuff

Thanks, Lucky. Dave Davies wrote:

Hi Dave: I use the tilting feature all the time. * chamfers, usually at 45 degrees * bevels, sometimes 7 degrees, or 12 degrees, or whatever is required * panel raiser, I like to adjust the look *

Anybody have an opinion on how the Ti 7 compares with Martin's T27? When I was in Los Angeles last Christmas I went to SCM's showroom to look at the L'invincibile ti 7 they had in their showroom to

David, Attached is my build sheet with 2022 list pricing as I optioned it. In the US it is a 15hp motor with star-delta soft start.? I really am impressed by it, and as David said, it seemed like

I was curious if Martin's new 20" Jointer/Planer combo machine would be available for examination at the upcoming AWFS show in Vegas this coming July.? I reached out to one of my insider contacts and

Christopher, They do have a mobility kit! The bottom front cover is attached via bolts that allows you to slide it off and access the space under it for a forklift or a pallet jack.? Depending on the

Awesome! @B Lam- What you mean double wall? @PK- that’s next level and super tempting, wish they had a mobility kit for that. Although I’d be nervous about moving 2k lbs more than once. @Albert

There is an upcoming auction in Keene NH. Tons of amazing equipment including a Martin T71 and an Altendorf F-90 https://nh.craigslist.org/tld/d/keene-auction-1490-st-martins-lane/7618898807.html

Mark thank you, On which machine would suit, I am looking at the 500 and 700 series from just saw to saw/molder to five functions machine. I am East Coast USA Ideally I would choose the short cabinet

I had a 951 for 3 years, no issues during my ownership I sold it because I need something wider and the workflow dictated that I need to go separate, I didnt like 951's fence and I didnt like its