开云体育

Aaron, Do you remove the collector hose each time you turn the operation over on the jointer/planer combo machine? I was thinking that if you have some extra “slack” in the hose length, that it

Hi Bill, One of the things I’m going to ask from you is a “120mm port to 6” hose adapter”. So that we can quickly connect/disconnect a 6” hose from things like a Felder jointer/planer

You might want to add to your Etsy listings the sizes that the adapters fit. Say the rectangular, list it fits over a 30mm x 80mm port and fits a 4” hose on the outside on the round end. That way

I might have made one of those Richard. If you can measure the rectangular part of the port, I can check. Then whatever hose size you need for the round. Unless I’m misunderstanding something.

Since we're on the subject of Bill's store ... is there one of those rectangular to round dust ports available for a Hammer K3/B3? Original hose was lost and I have a makeshift thing in place, but I'd

I've got the Stiles rep coming out tomorrow. I'm dying to know what that saw cost. I love the feature of the outrigger pivoting for miter cuts, and cutting on both sides of the fence would be great.

Marty, I can understand putting off that task! At least you have the luxury of doing it outside. Today it was 32 and rainy here in Minneapolis. No outside work for another couple months! Do you

Thanks for the kind words and I’m so happy that you’re happy!!! Let me know if you need anything else. BB [email protected]> wrote:

Hi Derek: A couple of questions below, all with thanks for taking the time to post. There’s a lot in your post for the forum! Cheers. 1. It is very nice to see Festo gear in your shop. I’m

Like the doors on my Fiat Spider, they wouldn't open when the car was on a lift supporting the frame.? Kind of scary.

Bill, Both items you have shipped me have been great.? They fit well and the color match is even great. Keep it coming! PK

Thank you wrote:

Here you go Jeff.... https://arizonawoodstudio.etsy.com Bill [email protected]> wrote:

Try this link: https://www.etsy.com/shop/ArizonaWoodStudio David Best DBestWorkshop@... https://www.flickr.com/photos/davidpbest/collections/ https://www.youtube.com/@David_Best

How does one find Bill's Etsy store? A search on Etsy just brought up pages of bill paying ideas. TIA wrote:

Why deal with dips in the cast iron surface from the weight of trunion assemblies when one can just operate their machine in outer space where there is zero gravity? Benefit of this is unlimited

Thanks Ken! I appreciate the kind words and support! Bill Bélanger [email protected]> wrote:

FYI, I recently purchased a non DRO fence extension for my KF 700 from Bill's Etsy site. Received it in just a few days packaged well and in good condition. It fit perfectly without any

Tom do you have any pictures or videos of your mentioned set up? I’m considering making a slab flattening jig and that might offer some inspiration.

Thanks for the tips on lubing the raise/lower screw. I am experiencing the same problem and was dreading diving into the mechanism. I am going to fix this today. Kevin *Kevin J. Wells*