开云体育

Joe suggestions are of course right on . You can make to story sticks to visually see how it works. You will have to be able to lock one door martin/campshure/co/llc mac campshure 7412 elmwood ave.

Door that thick you would need a triple rebate on one and the reverse on the other. Or a wide astrigal that is rebated.

I could use some advice from this group of builders with a lot more experience than me. I’m building a set of carriage-style shop doors that meet in the middle, French-door style. They are big, 5

I have a larger dual fan Belfab system and have used both the Nederman 500 and 750 at shows. I have to say I’m pretty impressed with the suction capability on the Nederman. It picks up the Soukup

I met him and toured his shop in Lewiston in the 80s. Always been impressed with his work and marketing skills. Even with CNC it is still a fairly low tech operation.

To the original poster and zdfusco, Apologies the title of this thread triggered a reaction for full size shop dust collector recommendations. I have owned Jet, Powermatic cyclones along with Felder

I love how they utilize CNC to take care of some of the grunt work yet maintain a reasonable level craftsmanship from the craftsperson When I worked in the veneer dept. of WallGoldfinger in Northfield

I too like much of their furniture, and it's a nice video, but the language about "integrating" CNC and hand craftsmanship seems like just marketing.? They extol CNC "allowing for exact precision and

I thought some of you might be interested in the following video that profiles Thos. Moser Furniture. I have a special history with this, in that I first met Tom in 1976 just after he started his

Sounds like you have a handle on it if you move the table you have to adjust the saw assembly to compansate . Check saw at 90and 45 tha to slider martin/campshure/co/llc mac campshure 7412 elmwood

Hi Joel: Those look like lovely clamps. I hope you get the 60% asking price. I am generally delighted when I buy used machinery, and generally appalled when I sell used machinery, because in Australia

Hi Albert: Aha, the penny dropped for me when I saw airtight solutions. I was not particularly well informed about “Nederman” extractors, but I know from experience that Airtight units are

35/1000 is perfect martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com instagram.com/maccampshure/ Designing

I got an indicator on the cutterhead tonight when I got homeand it was .035 across the entire head so I would rather not touch that. Also it doesn't look like this was ever moved since factory set if

Thanks David. Good to know they are still around. All, sorry, I did not elaborate as I knew David would know since he uses the outfit. I was also very happy with their aqua blue (not mauve) rollers

Also found a fan curve of the RL series, RL250, 300 and 350 if anyone is interested. in 2016 a RL350 costed $32k NZD, or 20k Euro.

Good day Lucky, I didnt have any technical issue with my hydrovane, but when I first got it, I called in compressor technician to give it a service, the cost of it at the time, $1000. I only bought

I have a Barth Multipress (smallest version) and 500V bench. ?When I purchased the multiples, I selected 4 of the BM-70-33 Rack and Pinion clamping gear units and 4 of the BM-70-33 stops. ?For my

A while back we were talking about recovering feeder rollers by Axiom. If this is the company you're referring then yes their website seems to be gone http://www.axiom-industries.com/ Dave Davies --

You mean https://www.axiomprecision.com/?gclid=Cj0KCQiAkMGcBhCSARIsAIW6d0C8p1fBzJZapCpxzL3KvStETLBryfWcuMlb0zXVCWy5ifjcuA7kjb4aArz9EALw_wcB#build-section Regards, Mark