开云体育

No room for a Kiln here, so a hello it will be. PK

I will be there as an exhibitor. Hall A Booth 10218.? American Wood Dryers.? Stop in and buy a kiln or just say hi.

IRC, the sensor on the 501 is picky about placement but you can obviously shim if necessary.

Thank you Sang Luu. I picked up a different display and found nothing. The biggest diff is in height about 2.2mm but hopefully that is okay. Imran Malik

The Siko version is the MA501 which has 17mm C-C mounting dimensions on the sensor. It looks the same as the Fiama.

I am thinking of adding Fiama F8P DRO to my K975 rip fence. I can order The sensor mounting bracket from Felder but I am not sure if the two mounting holes will match. Here is the Fiama sensor

I am attending Tuesday & Wednesday, would enjoy meeting FOG legends and newbies.

I am planning on being there on Tues/Wed as well.? IWF is a larger show than AWFS.? I was talking with one of the maintenance staff at the IWF about 10 years ago and he told me they laid 19 miles of

Do it on the thong. other Dave ________________________________ Sent: Monday, July 4, 2022 9:32 PM To: [email protected] <[email protected]> Subject: Re: [FOG] Is anyone going to

I could embroider this on a bunch of t-shirts and bring them with me to IWF [image: image.png] Dave Davies [email protected]> wrote: -- Dave & Marie Davies www.myfinishingtouch.com

Just in case: https://www.cafepress.com/davidbest <https://www.cafepress.com/davidbest> David Best https://www.flickr.com/photos/davidpbest/collections/ https://www.instagram.com/davidpbest/

Imran, others: Here’s the not followed through with thread from last summer about the switch. It started to work for a while, then cut off permanently in the autumn/early winter. I spoke with a

That would be a long drive. Diesel fuel would cost me more than the bench ? -- John Hinman Boise ID K700S and A941

No, it’s not the green switch. It’s the safety switch that cuts saws off but cannot be reset and doesn’t allow resetting so the saws can be turned on again.

Pat, Hope to see you there!? We should all get matching David Best T-shirts... HAHAHAHA PK

Hi Mike, It appears you have independent scoring. So I assume top green button starts the saw and the lower green button starts scorer, only if saw is running. This is how my K975 works. All this to

Power feeders have been used on saws for probably as long as they have been made and their is no reason to avoid using them. SLR’s and gang saws work on a completely different principle Regards,

I will be there on Tuesday and Wednesday, it’s been 20+ years since I went. Pat Rice

This will be my first time attending the IWF show in Atlanta.? I have attended most IWFS shows (Las Vegas) in the last decade or more because it is relatively close but never attended IWF (I was told

Roger, It was a test.? It did work and useful to turn your table saw in to a rip saw - they are great to process a ton of similar parts quickly.? Gang rip saws have been using this idea for decades