开云体育

Again, thanks for the great input. I feel kind of foolish not knowing this stuff, but better late than never. I just wish I was informed earlier from the sales department. Ed Cohen E. Cohen

Since the X-roll came out any attachment to the slider has to have the P-channel configuration. The backside of the cast iron table still has the F-channel configuration and as such, F-channel

This is good information. I wish that I was informed about this when I ordered these things and why am I not being filled in during my countless inquiries to Felder. Did I buy the wrong supports? I

Thank you for your comments. I agree with you. I just wanted to point out that Xtract is a mesh like Abranet (which has been my preferred for years). I'm not sure Xtract works better, but it works

My opinion is that the test is a valuable datapoint. While a significant effort was made to reduce confounding variables by the use of a sanding machine (more on this in a moment) to control for

Hi Ed, F coupling was replaced with P coupling with Xroll around 2004. You can still get extension tables that mate with P coupling. My 2001 KF700 has F coupling so I had to purchase P coupling, when

I feel your pain pain Wade. I could only imagine the frustration you're experiencing. I can relate to the difficult communications with the Felder folks. I have had a few of my own but is pale in

I’ll play with the 3D printer and see what I come up with…. Brian Lamb blamb11@... www.lambtoolworks.com

Brian, I see an accessory for sale from you in the near future? I am a buyer!? Just like the wall mounts for Mac's clamps, I feel they could be a great addition for people like me with a smaller

That works…. Brian Lamb blamb11@... www.lambtoolworks.com

Hi Bob, VFD’s would work… but a few questions. What size motors, I’m assuming you already have three phase, are you wanting to continue to use three phase or convert to single phase input using

Thank you all for the feedback. Sounds like worth trying. I also reuse discs for hand sanding. Good to know about issues with edge sanding. Imran

When my vintage 2004 KF500 S did not apply braking to the saw blade, I contacted Felder for help. In a series of e-mails with Timothy Kennedy at Felder Group USA, I received the bad news that the

Does this count? My saw is in the middle of the room, clustered with the sawstop, jointer, and bandsaw. Jason Holtz J. Holtz Furniture 3307 Snelling Ave. South Minneapolis, MN 55406 612.432.2765

My experience is the same as Dan's. Good for flats, not great on edges. About worthless for hand sanding. It tears quite easily when you catch an edge or corner. It's thinner than Abranet, and

I am surprised that you didn’t get any results contacting Ruan, did you ever call him and talk to him? Emails can be “avoided” too easily at times. As for commissioning, I’ve helped several

I'd commission the Attorney General's office and maybe get an attorney involved. And find another vendor who can supply and fulfill your needs unlike the one you previously entrusted.

Hello FOG members, I want to thank David Best & Brain Lamb for passing on the contact info to me for the President of Felder. In hopes to get my issues resolved a bit quicker, maybe. I wasn’t

There are also lightening holes in the back of the mounting head, 5/8” diameter. I would do the same style you did, but mount the blocks vertical and stick two 1/2” dowels out of the top surface

Hi PK Storing the jigs so they were easily accessable yet positioned securely was a bit of a head scratcher. Eventually, I came up with the idea of using the recess in the back of the 'bracket' to