开云体育

John, do you have a Leitz rep in your area? Leitz have an enormous catalog of tooling and I’ve bought several blades from them which are “blanks” in that the carbide teeth are flat, ready for

I have been looking for an FTG blade, but they are not easy to find. This would be primarily for flat-bottom cuts. I bought a couple of Tenryu blades, but they do not offer a flat-tooth option with

You should also consider your selling motivation/strategy. For example, your Hammer A3/41 will sell in a heartbeat if your price is 'reasonable'. That's fine if you want to just get rid of stress

That I wouldn’t know, best to ask Felder that question. Brian Lamb blamb11@... www.lambtoolworks.com

Mike, It may be different on your saw but besides std locking position I can also lock when the slider is fully out, as it would be for loading a sheet. It may not be the intended use but the Locking

Now I understand what I am looking at ? I appreciate you fellows staying with me until I figured it out. I suspect the screws holding the eccentric posts in place were installed with thread lock

Mike, I see the slider lock lever adjacent to the table in your picture. Locate the two arrows on the slider and base and flip the lever inward. Bill Belanger

Hello Bill, I wish you a happy and healthy retirement. I have a Felder saw on order, I would be interested in any blades, groover/ dado or other saw accessories. Also....a dust collector and piping/

I would also list on this site as well as sawmill creek. In addition to Craigslist, I would also list on Facebook market place. Since Facebook market place started, Craigslist has kind of fizzled out.

If you post a list you might find you might find folks here that want to purchase the smaller stuff stuff as well. -- Michael Garrison Stuber

I would be interested in lots of add-ons for the saw/shaper. let me know if you are selling those separately. Thanks Eduardo

Hey Bill, How much do you want for the hammer a3-41? I am in N. California and might be interested. Is it straight blade or silent power? Any photos would be great! Thanks! Peter

Post the details here, always new people looking to find a nice used machine. Location, pictures, will you help crate for shipping, all that sort of information. Brian Lamb blamb11@...

Hi Everyone! Greetings from sunny California! Will be retiring in the next few months and moving to Europe. Therefore, I need to sell all of my woodworking equipment and could use some advice. For my

Yep, familiar with them. I was just curious if Mike had that on his model slider as well. Thx, Wade

Wade, you should see two black arrows pointing down on the side of your slider indicating locking positions.

Mike, Does your slider at least lock in the far pulled back position? What is the red band for under the black horse shoe handle? Thx, Wade

Just out of curiosity, regarding the slider lock, could you not swing one clamp arm over so that the clamp could press down on the cast iron table? Thinking that might provide enough stability to load

Not, if you use the shirt xcut fence and would like to leave that nut installed. I have changed handles on my clamp to cam type so now I just unscrew it - much faster than the original kip lever. I

Can’t the long tee nut slide in with the other install locations? Regards, Mark https://www.instagram.com/kessler_woodworks/