开云体育

Chris Peterson from Comprehensive repair was here working on my SCM Sandya 5 yesterday. It's been remarkably trouble free for the 5+ years I've owned it. He dressed my conveyor belt to expose new

Just thought it be nice to share random stuff with the group periodically. Today's photo is of a few slider handles I made recently. Some prefer the butt bars or the extension tables to grab, I like

Each email has “reply to sender” at the bottom. That should get you a private message to the sender. Brian Lamb blamb11@... www.lambtoolworks.com

?Mark, David Best thinks this is mauve Imran

Mark, David Best thinks this is mauve Imran

Imran, Thanks for sharing. You have done a superb job of explaining the process. I will use your information and see if I can easily adapt it to my Hammer B3 machine. Michael’s solution is very

Well, I for one am disappointed that there are not any Mauve colors.? Regards, Mark https://www.instagram.com/kessler_woodworks/?hl=en

Finally did a writeup on how I added the wireless switches in the slider. Don’t crucify me on the wire color, used what I had. Created a new thread to add hashtag. Here is my original post with some

Bill, I don't know how to start a private conversation in this forum and don't want to bother others chatting about your fence. Can you contact me? mike@...

I would agree, the original intent was always the ability to quickly hold workpieces, allowing for a safer cut. I think F&F, particularly on this forum, has been added onto and improved in many cases

Edited - first version the photos were stripped out. I agree with Mark. There seems to be some confusion about the original and primary benefit of the Fritz & Franz - that being the ability to pinch

I agree with Mark. There seems to be some confusion about the original and primary benefit of the Fritz & Franz - that being the ability to pinch or trap-squeeze small parts between the Fritz and the

I’ll sell my Felder fence. I only use the table part since I got Brian’s. Not sure what for a price though. Bill Belanger

How is that used to cut small pieces, like cross-cutting a 1”x1”x 2” long piece (i have cut them smaller than that - Not seeing it, David Bedrosian ff or ones like it are perfect for that.

Wow Derek, is that NASA issued model? ? Wade

Like many others, I made and used a F&F jig soon after sliding down the slider hole with my K3. Over time, I found that I much preferred the precision and versatility of a parallel fence ...

For those of you that are not on Instagram, you can watch a YouTube video showing my jig done by Ramon Valdez -- https://youtu.be/z2fg6Ex9VEI While you are on Ramon's page, you should check out some

Thanks for the interest in my Fritz and Franz jig.? If you are on Instagram, you can see all of my related posts on the jig by searching for the tag #BedrosianFritzandFranz.? You can DM me on

I think I already have the extension table (430-104) for the Felder parallel fence. If someone wants to sell their fence (because it doesn't fit, or they bought Mr. Lamb's) let me know.

I have seen them in a shop here in Auckland, the owner was closing his shop, the asking price was a bit high but it did cost him some serious $$ to buy, it was sold within a week.