开云体育

Not sure I would want the graphic representation of missing fingers after you trim that to length… :-) Brian Lamb blamb11@... www.lambtoolworks.com

The STL is awesome! Can’t wait to use it!

Dan, I am just a hobbyist woodworker, but I recently upgraded to my “forever” saw from a K500P to the Kappa 400 with all dro. I totally love the Auto rip fence and digital crosscut stops. Since

I think there will be near 100% consensus on this forum on what Jay B said, DRO on xcut before rip. I said near 100% because I never know what Cliff R would come up with ? Imran

Hi David, Thanks for thinking of me but the aquamarine PF wheels are on pre xroll KF700. Imran

Hi Dan, I received my K700S not that long ago and new to sliders. IMO the outrigger fence is the better place to have DRO instead of the rip fence. I went with DRO on the rip its very nice to have but

Yes you can David, if you buy 2… I have to special order mauve. ? Bill Belanger [email protected]> wrote:

If by “Auto rip fence” you mean a motorized positioning fence with DRO?? Zero chance for less than $5k. Felder builds machine configurations to order and the motorized rip fence is not a

ASAIK, Boral is siding and trim product.

I used Boral for some exterior door jams recently. I had to laminate 3/8" plywood to it to give it any strength or screw holding ability. The stuff has the advantage that it can be used for earth

I had originally placed an order for a k700s back in October and was told that the specific machine was built and to be delivered last week of December. It is now almost mid January and my Rep Jeff

I wouldn’t know where the 45? cut lands, and how consistent that is from machine to machine. I would probably think that might have to be a machine to machine custom situation. Honestly I don’t

There you go. Let me know if you have any questions Bill, or need any adjustments to the file. Brian Lamb blamb11@... www.lambtoolworks.com

Brian, you may want to make this in 45 degrees as well … https://i.postimg.cc/mgy02zcz/6-CDF5-ABD-209-F-4-C06-B3-A0-FC671413-C759.png For those making their own from UHMW (as I did), this is the cut

I'll print it for $25 plus shipping. Bill@... Bill Belanger

No… don’t really want to get into selling 3D printed parts. There are plenty of online or local people that will print for you, just provide the file I uploaded and that should work. You can go to

You can print it in any color of filament you can buy… Brian Lamb blamb11@... www.lambtoolworks.com

will you be selling them?

Hopefully tan and taupe! Joe Sent from my communication device. Please excuse any grammatical mistakes. [email protected]> wrote:

I spent a few days and printed some test parts to fit into the standard 72mm x 70mm fence extrusion. Did the final iteration today and it’s ready to go. I changed it to use a standard 90? cone