开云体育

That would work. I made the assumption that it had to be tool less as in adjusting shelves. Imran

Glen, have a look at the adjustable shelf pull-out system I came up with for a client. https://flic.kr/s/aHBqjzxB1j <https://flic.kr/s/aHBqjzxB1j> The goal here was to have adjustable height pull-out

?Glen, ?First thought that comes to mind is having a stack of dovetail ways on the inside on each side of the lower cabinet. The width of the dovetail way should be wide enough to receive a

Well While I am at it and until I fix my spindle.. One of the jobs I am doing now, The customer wants pull out trays in the lowers. You remember those things we did in the 80/90 days instead of

Has anyone experienced the digital readout on their 941 not displaying anything but yet the machine runs fine? I've had my readout not turn on or show the readout but yet came on after I turned the

Been there, done that. In my case the cutter itself was spin welded to the shaft. I had it pressed off at a machine shop (something I could do myself now), but the shaft was so badly damaged that it

Glen Bet you won’t do that again!! I would file off the burr with a fine fie, just the burr you will be fine maybe a little emery cloth only on the spot. Mac,, martin/campshure/co/llc mac campshure

Hi All, Well I have apparently spun a cutter head on the shaft. Not sure how this happened as the stack was very tight and I know have the last spacer above the top of the shaft. my guess is it wasn't

He emailed me 12/31.? He said thanks to the FOG he was sold out for now!? I am sure he will make more! That is the price - $295. PK PKwoodworking

Hi, Scott, have you sold the F & F Jig. I would very much like to purchase it. But would you consider $525. If so, I’ll buy it using PayPal. If you’d like to talk on the phone about this let me

Hello Scott...I replied to your contact email regarding your Fritz and Franz.

As Bill Hope pointed out, many deliveries go without issue. I've received four separate shipments from Felder (KF700, A3-41, HS950, RL160+FAT500), and all have been super easy, no-frills affairs. I

All: Yes, $295 plus shipping, super responsive but said he just had a couple left due to this Felder group surge…lol. Terry

If I remember correctly they were $295 plus shipping Dave Davies wrote:

Joe, Maybe he has too many? Sorry, couldn’t resist. LOL I didn’t reach out to him yet so i don’t know what price he’s asking, if I’m the Bill you’re asking. David Davies should know….

Bill, what is he selling them for? Sent: Sunday, January 2, 2022 11:27 AM To: [email protected] Subject: Re: [FOG] Crazy Horse Dolly Bill, I emailed Michael directly. It wasn't on his

When I picked up my Felder at the freight terminal I quickly understood all the damage. The forklift operators drive FAST with and without a load. Like 20 MPH fast. I was told by Felder they use the 2

Hi Mac, let me start by saying that you are partially responsible for me thinking about selling this jig because your clamps are simply awesome. ?In terms of the Ruwi F & F Jig I made one for 90

Ed, you're only hearing about the bad experiences. There should be some good ones as well. My Hammer B3 came in an open frame crate as well. There was a bit of damage to the 'crate' on the slider

Yes, I just experienced a delivery of a damaged sliding table saw package. (sorry- this machine came from Italy - forgive me now before continuing...) Slider was okay, as it was in a solid wood coffin