开云体育

Also are those wheels all 4-swivel? Or 2 fixed and 2 swivel? [email protected]> wrote: -- Brett Wissel Saint Louis Restoration 1831 S Kingshighway Blvd (at Shaw Blvd) St Louis, MO 63110 314.772.2167

Thanks everyone. I knew it was safe but since I hate avoidable rework I wanted to be sure. Shinta, yup your post got me going to do this. I just do not care of the mobile base I got from rockler. Even

My FB710 (900 lbs) sits on 2x4 douglas fir and plywood base, material from another machine's shipping crate and built to fit a narrow-fork pallet jack.? I think you saw the pictures I posted in

Annu...great story...them kids sometimes can surprise you!? My K700S on order will not have the DRO, and now after seeing Brian's products am wondering if I should install post delivery...ugh, again,

My 2000 lb bandsaw is on 4x6. There is nothing precision enough on a small bandsaw for a wood base to be a problem. Dave ________________________________ Sent: Wednesday, March 24, 2021 10:12 AM To:

Hey Imran...only thing I would be concerned about is the softness of the wood and stability over time (twisting, cracking, shrinkage...) given the weight of the BS and time.

Marc...what was the process you went through to get the JP onto the mobile base?

Craig, BTW capacitance can drop 10-40% depending upon low or high temp. You may trying warming the capacitor with hair dryer (from distance) just enough and give it a try. Assuming, J/P has it’s own

Craig, From posts here some CF series multi function machines share start/run caps. I am not sure about your vintage machine. If you can tell that J/P motor has it’s own caps separate from saw motor

Hi everyone I hope you can assist me I have not used my jointer planer for some time and my workshop is quite cold. When I try start my jointer planer by holding in the start button (its single phase)

Oh! if Corey at Axiom is right, they have moved on to Yellow for 60 duro. Must be a change for spring of 2021 collection.

Very Funny. Did you edit that?

Imran:

Hey, something up there still works ? Imran

493 pounds. 500 is close enough ;-) [email protected]> wrote:

I am going to place my bandsaw on skids. I can look it up but it likely weighs ~500# - Laguna LT16SEC. Any reason I should not use SPF lumber for this? BTW, this stuff is couple of yrs old if not

Nice! Here’s my version of a mobile base for the AD741. In a small garage and need more freedom in moving it.

Keith, Thanks for the update. Great news. As we hypothesized the racket likely came from chain drive for the feed rollers. Happy woodworking. Imran

I could see the angled cutter head working great on chip out prone material, I’ve skewed boards across my jointer all the time. The the idea that the angled head solves the twist in the board

Dave that makes good sense. Woodmizer tension there saw I’d say average of 3 to 5 thousand pounds. martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell