开云体育

Stephen, I have 2002 KF700 and it takes as Brain said 400-136 router spindle which IIRC is for 1990-2007 machines. I could not find a P/N on my router spindle. With S/N of machine Felder can confirm

First, a year 2000 machine won’t do dado’s, so 1 and 2 are no. 3. yes, 4. no, 5. haven’t used them, but they should work. 6. maybe, it should be possible, but you’ll have to customize a zero

Hi all - I am negotiating the purchase of an older KF700 (year 2000). I realize that my typical joinery/grooving/rabbeting techniques with a US style dado blade set on a 5/8 arbor are going to need to

AJ, It makes a lot of sense for a business to go for commissioning for reasons you cited and also because a business should recoup the cost, otherwise it is a bad investment. I do not know business

I believe worse thing now a days, that is common, is resins and glues. With wider machines, I think, the likelyhood of processing glued boards goes up even for a hobby WW. Imran

I was glad that I chose to have my saw commissioned.? I have no doubt I could have worked through the commissioning on my own, but it would have taken me significantly more time (as a business, I

Cliff - for hobby or one man commercial shop use, HSS is just fine. Fact is the majority of machines shipped with and were used with HSS knives for decades with little trouble. If you’re running

I am sure this is well known to the group but for new comers to slider be aware that while you can carry out various checks the calibration is done in a certain order. For this reason, I perform

Installing the slider and calibrating is not hard to do, just time-consuming. Go one step at a time and plan on a whole day to get it right. I bought a K915 slider, installed and calibrated it

Hi Cliff, I got M+ but am curious now as to what I have on the machine. This is my first replacement set. When I got the machine it still had the original edge at 7 yrs of age. It cut fine and

More info on the machine: - purchased June 2016, delivered late 2016, has sat in my woodshop unused till now, woodshop is heated with 24x7 dehumidifier, unit never used Total out of pocket for machine

High speed steel? won't stand up to the silica in hardwoods. There are grades? that will? but straight HSS isn't going to

Hard to say whether its worth the $1400, depends on the tech you get which is a crap shoot. There are enough folks here in addition to the Felder Tech support to help get you through it if you have

David, I am interested, can you give a bit more info and what you would like for it, i am in the foothills of Cali so pick up is possible. Glen Alpine Moulding and Millwork Inc. Mail: P.O. Box 257

What are you looking to get for the machine? I've no idea what they cost. Jason Jason Holtz J. Holtz Furniture www.jholtz.com 3307 Snelling Ave. South Minneapolis, MN 55406 612 432-2765

My KF700SP came well setup from factory despite some shipping/delivery issues, all minor IMHO.? Aside from some minor adjustments to get to the tolerances of 0.003" toe out for the rip fence and

I just recently received a new K700S and I’m not expert but I feel it was dialed in really well from the factory. Steve Lyde www.Instagram.com/SL1800

I have a Felder FD21 which I bought a few years ago and have never used, it is brand new. Looking to sell. It is fully loaded with many options. I'm located in the San Francisco Bay Area, would prefer

You can find some useful information here: https://www.locksmithledger.com/locks/article/11317804/guide-to-mortise-lock-installation-jigs

I used this tool for multiple installed doors using mortice locks and other specialized locks that requires more than a round hole. Works very well. Souber DBB Lock Mortiser (