开云体育

Guys just piddling around in shop and it occurred to me to check how far back my fence plates go. When I mount the hood in the rear set of holes, the fence plates actually sits behind the centerline

Thanks Tom for the pics. Looks like I can fit the pressure module and extension table if I switch from Aigner to Felder rails. Here is a pic showing ext. table not fitting on Aigner rail. The rail is

Hi Joe! I added the Felder mounting rails to my little Laguna 14" saw and have been really happy with the utility they've added to the machine. The apron on the cast iron top wasn't tall enough to

Yea, was planning on getting better footage but the ops manager popped into the area, i mean of all places - the building is huge with hundreds of machines on top of each other and he happened come by

These pocket doors came up in discussions a while back https://www.cavitysliders.com/Contact?utm_source=risingerbuild&utm_medium=youtube&utm_campaign=risingerbuild_cspocketdoor

Thank for clarification Mark. It was hard to see what’s going on ….. Sent: Saturday, March 06, 2021 11:10 AM To: [email protected] Subject: Re: [FOG] zci for k940 Hi Imran, Wire edm is

Hi Imran, Wire edm is done submerged, the video shown is the cnc’ing after the edm Regards, Mark https://www.instagram.com/kessler_woodworks/?hl=en

Looking good. I have not seen wire EDM in person but read up some time ago and was under the impression that it is always done submerged. Apparently it can be done with just abundant fluid as well.

I have the same sliding table on a K500 and you cannot if you plan to clamp on both ends. With clamp, the minium is 2800mm to cut 8 ft board,?if your clamp bases are not too big. According to many

I am thinking about trading up to a k700p with the 2500mm slider.? Is cutting a sheet of melamine which is 2460 long do able on the saw including the scoring blade.? I currently have a k3 winner

Thanks Patrick & Imran for your thoughts. I was excited to see this saw come up in the Seattle market local to me, but then found it to be so-so in person. It's missing an eccentric clamp, table saw

I am looking at selling my k3 winner 2000mm slider and purchasing a k700p with the 2500 mm slider.? Would the 2500mm slider on the thee k700p by able to cut the untire length for a 2460mm long sheet

Joe, I mounted Aigner rails on my bandsaw for Aigner pressure wheels following Aigner directions. Later I realize that my felder cast iron extension tables don’t fit. Maybe, I could have mounted the

I’m a big fan of KN Crowder products. Here is a link to there barn door systems: http://www.kncrowder.com/slidingdoor/#barnDoor <http://www.kncrowder.com/slidingdoor/#barnDoor> You may or may not

Hi, My wife wants me to replace her pantry door with a barn door. She wants it painted so I was just going to make it out of 6/4 popular. She likes the soft close/open feature. Any suggestions on

I would like to have mounting rails on bandsaws for extension fences when sawing long veneers.? I have Felder rails and tables on my saw and shaper. Is the Aigner rail the same size as the felder

I had a chat with Jeff at Northfield about a 32” bandsaw I was considering. Got similar information. The last owner bought in 2006 and sent the wheels in to Northfield to be trued, new tires, and

I believe so. No internet presence . I just gave Louis the length, inner and outer dimensions and had him specify the coil. I know there are formulas but I took the easy way out. Dave

Is Iturra still in business?

Guys, you mention an Iturra spring. What makes it good? My Wadkin DR36 needs a new tensioning spring as the original is either worn out or was never stiff enough. But I have no idea how to buy